Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020-5020-6030 built tough

Welcome Guest, Log in or Register
Author 
detroit deere

12-10-2006 17:27:54




Report to Moderator

i ran a 6030 for 12 years with 240 horse. it would put fire out of a 4 foot stack. i never did have any engine trouble.
i also have a 4020 with a v6 detroit and a 5020 with a 8v detroit. both tractors have been trouble free.
after much begging, kinze put a v6 detroit in a 1486 for a guy and the rear end lasted a half day of chiesel plowing.




[Log in to Reply]   [No Email]
Detroit 5020 Power

01-22-2007 19:11:27




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
Could you post a pic of the 4020 and 5020 you have? My dad has a 5020 with a Detroit and it has no problem pulling our plow or disk, it slips some because there is no fluid in the rear tires. There is plenty of power and no oil leaks at all.



[Log in to Reply]  [No Email]
mike jenezon

12-11-2006 22:34:56




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
Hey detroit any chance you could post or send me some pics of how they did the adapter to put it in there I have a 5010 i would love to do that to as i sure as heck aint goin to put a junk deere back in there let me know thanks mike



[Log in to Reply]  [No Email]
detroit deere

12-12-2006 08:27:22




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to mike jenezon, 12-11-2006 22:34:56  
mike:
sorry i can"t help you on this.
i bought these detroits from a gentleman in iowa who had kinze do both of them in the late 60's.
you may try kinze mfg. if they have any info available on them. john



[Log in to Reply]  [No Email]
mike jenezon

12-12-2006 09:53:14




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-12-2006 08:27:22  
Sorry i understood you to say you HAVE two tractors with detroits in them All i am looking for is a couple decent pics of where the engine bolts to the trans . i have tried kinze they acted like they had no idea what i was talking about (has to do with being 2500 miles away and only being able to contact by phone or email ) Nobody wants to take that pic not sure what the big deal is . thanks anyway mike j

[Log in to Reply]  [No Email]
detroit deere

12-12-2006 10:24:31




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to mike jenezon, 12-12-2006 09:53:14  
mike:
i do have these two tractors. are you wanting a picture of the adapter plate? john



[Log in to Reply]  [No Email]
mike jenezon

12-12-2006 14:41:40




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-12-2006 10:24:31  
Yes that is basicly all i am after I can figure out the stuff on the inside but would like to see how they did the adapter plate . I have seen several pics of the repowered tractors but never of the joint between the motor and trans . sure would be great to see how they did it . thanks mike



[Log in to Reply]  [No Email]
1206SWMO

12-12-2006 10:05:41




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to mike jenezon, 12-12-2006 09:53:14  
I wish Kinze still made that kit because if they did I'd pick up a cheap 5020 with a bad engine and put in a 318 Detroit that I have.



[Log in to Reply]  [No Email]
5020s rock

12-11-2006 12:08:40




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
CIRCLE THE WAGONS MEN!! LOOKS LIKE YOU ARE OUTNUMBERED KINZE HATER!! JON KINZE REALIZED
THE 5020 AT THE TIME HAD THE HEAVIEST REAREND IN THE WORLD, BUT THE 531 HAD ISSUES. I BLEED GREEN
..... BUT A REPOWERED 5020 IS CHEAP POWER AND
REALIABLE. I THINK SMOKEY AND THE BANDIT HAD A 318
IN THIER TRUCK. I BELIEVE THE 318 WAS BUILT BY
GM FOR MILITARY TANKS TO PROTECT THIS COUNTRY,
SO "HATERS" COULD HATE.....BITTERSWEET..... ...

[Log in to Reply]  [No Email]
TOM4055

12-11-2006 16:20:23




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 5020s rock, 12-11-2006 12:08:40  
I realize what you are saying about the 531 not being the best, but you go with the detroit motor in it, and its really not a john deere anymore, is it? And if you like that detroit motor better than the deere motor, you are just not 100% deere like me-to bad for you!



[Log in to Reply]  [No Email]
1206SWMO

12-12-2006 08:38:10




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to TOM4055, 12-11-2006 16:20:23  
So is a 435 or 8020 not a JD since they came from the factory with Detroits?



[Log in to Reply]  [No Email]
Lawmar

12-11-2006 10:43:05




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
I like your logic. One guy had a 1486 repowered and you use that as the standard for all comparison. Well let me try to think that way for a second. I know a guy who repowered an older John Deere 20 series tractor and he was a flaming h o m o s e x u a l. So only h o m o s e x u a l people repower old John Deere 20 series tractors. Also why the hell would repower a 1486 with a detriot when IH made the 466 Motor.

[Log in to Reply]  [No Email]
detroit deere

12-11-2006 15:39:55




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Lawmar, 12-11-2006 10:43:05  
i guess jon kinzenball must be a one according to you.



[Log in to Reply]  [No Email]
Lawmar

12-11-2006 10:37:51




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
If you want a larger tractor... John Deere Makes them. WoW other comapnies do to!!



[Log in to Reply]  [No Email]
Stuart

12-11-2006 10:14:36




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
For the record a Detroit engine is only good for two things, keeping the driveway oily, and converting diesel fuel into noise. There is a GOOD reason why they quit making 2 stroke motors. Who cares if you got 300 hp, you can not and will not put it to the ground pulling a plow with a two wheel drive tractor. How do I know this? I have a 8400 MFWD with in excess of 300 hp and it weighs 27000 lbs and still will spin pulling a 9 shank glencoe chisel plow. V-8 CAT motors for the most part were a throw away motor unless they have started makeing overhaul kits for them. 300 hp is great if your going to go tractor pulling put that is a totally different tune than pulling a plow or other tillage tool.

[Log in to Reply]  [No Email]
1206SWMO

12-11-2006 11:09:02




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Stuart, 12-11-2006 10:14:36  
For being good for only two things our old time truckers sure put billions of miles on the old 2 cycle Detroits hauling on our nations hiways from the 1940's to the 1990's.Do you think if they were total junk they would have stayed around that long?

Half the trucks in my area were Detroit powered in the 1960's-70's.Some didnt like them but had to admit that it was hard to destroy one.The reason they quit making them was emissions standards.

My 1967 Oliver 1950 with a 4-53 Detroit will easily pull a 6x16 plow.How many other 212 cube engines will do that?When I pull it at a tractor pull I always get tons of questions afterwards how that little engine pulls so good.Lots come just to hear it.

[Log in to Reply]  [No Email]
Stuart

12-13-2006 06:45:49




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 1206SWMO, 12-11-2006 11:09:02  
I have an 856 farmall at 105 hp and it has sort of a hard time pulling 6-16. You must have the power turned up on it or your driving around with the plow up or it is really easy pulling soil. How fast are you traveling and you always cant trust the tach cause of wheel slippage.



[Log in to Reply]  [No Email]
1206SWMO

12-13-2006 21:58:31




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Stuart, 12-13-2006 06:45:49  
The 1967 model 1950 Oliver I pull with is running 150 horses so 6x16's wouldnt bother it any.

The 1966 model 1950 Oliver we farmed with some years ago was fairly stock at 117 hp and pulled 6x16's in 3rd gear about 10" deep.Our ground plows pretty easy.Some 806's were sold new around here with 6x16's and they pulled them in low 3rd-
TA forward.

I once had a real warm 1968 model 856 IH that ran 150 horses in the field and it would pull 6x16's in high 1st-TA forward but we mostly ran low 4th TA forward.It had 24.5 x32 rear tires,heavy clutch, TD-15 dozer turbo with some pump work.etc and we tractor pulled it alot.

10 miles away the ground pulls harder and they all ran 1 bottom less there.5x16's would work a 806-856 hard there.

[Log in to Reply]  [No Email]
Stuart

12-13-2006 06:37:07




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 1206SWMO, 12-11-2006 11:09:02  
My father worked on the two stroke detroits in there glory days and he said from the time they were new they were junk. He can tell you everything about them you ever want to know, he is in essence the bible of detroit two strokes. Some of there engines were better than ever and were a little easier on gas but as a whole they were junk. His quote was that the only thing they were good for was converting diesel fuel in to noise. Why in the heck would you want to listen to them scream all day? junk junk junk.
Except for maybe tractor pulling a 619 should be suffiecent at 225-250 hp for field work, try getting it all to the ground with just two wheels. a 6030 with a 619 was awesom brute of a tractor. I am a green fan all the way. The only good non JD enging ever put in a tractor was the cummins they put in the 4wd's. why not try to bolt up a 8.3L cummins out of a magnum? Cheap to buy and overhaul, parts are readily available and they create a huge amount of torque.

[Log in to Reply]  [No Email]
1206SWMO

12-13-2006 22:23:30




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Stuart, 12-13-2006 06:37:07  
third party image

Stuart,one mans noise is another mans music.I'd rather listen to a 2 cycle Detroit than any other engine ever made.The louder the better.I'd love to have a Kinze 5020 with a 318 Detroit.Theres one on a 8000 acre farm 30 miles away and they have used it for over 30 years,

Ask your Dad exactly what was junk about the Detroits?It sounds to me like he just didnt like them.They only built the 2 cycle Detroits for 50 years and 10's of million of them were sold and lots are still running today.Stuff thats total junk doesnt stay around that long.I have too many friends thay drove Detroits for a living and they will argue with you.

Our old 2 cycle Detroit mechanic in town is still going strong at age 73 and built my 1950 Oliver's 4-53 Detroit to pull with.Hes worked on truck engines all his life and says in its day the 2 cycle Detroit was no better and no worse than any other engine.

Heres a picture of a friend pulling my 1950 in July 2006.Got 3rd out of 7 in the 13200 farm stock class.Running 3rd gear at 3000 rpms.What a sweet sound!

[Log in to Reply]  [No Email]
Stuart

12-14-2006 05:44:02




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 1206SWMO, 12-13-2006 22:23:30  
For one thing they were always leaking oil. They had no lugging power unless wound up tight, some models did not take the heat at all. The only reason they were so popular was because they were pretty much the only thing around, oh by the way they WERE NOT A LONG LIFE ENGINE. I have an 856 with a 407ci motor that will last 25000 hrs and I know for a fact that a detroit wont go half that. As soon as I mentioned the 4-53 he started laughing at the fact that anyone who thought that was a great motor need to drive a cummins powered unit. examined and this is coming from a guy who worked on the old international gas engines. You stated that back in the day they were pretty good engines well back in its day a horse and plow was a great thing to. I will agree with to each his own. But a wise decision would be to put an inline smaller cummins in.
You never will beat a cummins or a cat or the 466 international motor for power torque and life
My uncle and neighbor both drove trucks for 50 years and have seen it all. Everyone liked the detroits cause they were the only thing around at the time with power.

[Log in to Reply]  [No Email]
1206SWMO

12-14-2006 21:59:41




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Stuart, 12-14-2006 05:44:02  
Stuart lets just call it a draw.I love Detroits and you hate them.Leaking oil doesnt make them a junk engine plus they are cheap to OH.



[Log in to Reply]  [No Email]
Mike M

12-11-2006 05:59:05




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
I remember a tractor jockey telling me one time that he thought the 5010 held the worlds record for throwing connecting rods ?



[Log in to Reply]  [No Email]
Glen in TX

12-11-2006 09:21:08




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Mike M, 12-11-2006 05:59:05  
I never heard that about rods but JD mechanics here had a problem breaking off bolts in the heads and couldn't get new heads from JD anymore? So we had to wait and wait till the factory got another head made or rebuilt a used one for 5010. Took local dealer over 6 months!! Our then new 4320 was about worn out before we got the 5010 back. If they want a real 6030 they need to get a 300 hp JD 619 from a chopper to put in one like Chris in England did lol. Yeah he said it dynos 300 hp! Might find it in archives or maybe he'll read this and post a pic again?

[Log in to Reply]  [No Email]
5020S ROCK

12-11-2006 03:10:24




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
THANK YOU DETROIT DEERE!! I FELT SCARED AND ALONE ALL NITE. ON ANOTHER THREAD A GUY WANTED
TO CASTRATE ME FOR OWNING A 5020 WITH 318
DEEETROIT!! GUYS LIKE US GOTTA STICK TOGETHER.
THIS ALL STARTED WITH THAT D-M 5010 ON EBAY.



[Log in to Reply]  [No Email]
stuart

12-13-2006 06:38:38




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 5020S ROCK, 12-11-2006 03:10:24  
Yeah you inbred retards should stick together.



[Log in to Reply]  [No Email]
Kinze And Detroit Hater

12-11-2006 06:01:30




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to 5020S ROCK, 12-11-2006 03:10:24  
You should be castrated,boiled in oil and shot for using anything Kinze made. Putting a Dribbletroit piece of junk in a John Deere tractor should be a felony that carries the death penalty. And all you morons that think that conversion is "cool" should be given the death penalty. You`re not John Deere people at all you`re idiots. In fact you are worse than the IH morons



[Log in to Reply]  [No Email]
DETROIT DEERE

12-11-2006 19:56:12




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
DEERE PUT DETROITS IN THE 435 AND THE 8020 I GUESS KINZE IS'NT THE ONLY ONE WHO COMMITTED A SIN.



[Log in to Reply]  [No Email]
Dirtjockey

12-12-2006 08:31:42




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to DETROIT DEERE, 12-11-2006 19:56:12  
But history will tell you that the 8010 and 8020 were a big flop. What does that tell you! Deere stuck with better engines after that



[Log in to Reply]  [No Email]
1206SWMO

12-12-2006 08:41:35




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Dirtjockey, 12-12-2006 08:31:42  
It wasnt a flop on account of the Detroit engine.Those 6-71's were a good engine.



[Log in to Reply]  [No Email]
1206SWMO

12-11-2006 21:57:41




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to DETROIT DEERE, 12-11-2006 19:56:12  
I wonder what Detroit Hater will say to that.Hes the one with no gonads.

I once had a neighbor that had an 8020.



[Log in to Reply]  [No Email]
billde

12-11-2006 19:28:27




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
If the 531 had not been such a farce Kinze wouldn't have had that opportunity now would he? It wasn't so much the fact of wanting more power as it was having a reliable engine that was economically repairable.



[Log in to Reply]  [No Email]
Heat Houser

12-11-2006 19:17:54




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
I guess you will have to boil/kill all the engineers and the marketing types that developed the JD8010/8020 back in the 60's since they were designed with Detroits as original equipment.



[Log in to Reply]  [No Email]
dirtjockey

12-11-2006 12:56:38




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
It's just the way you said it! That is got to be the funniest thing I've heard in a while. Thanks for the laugh - i needed that.



[Log in to Reply]  [No Email]
jddriver

12-11-2006 09:34:03




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
I love JD but I think it is cool that Kinze whipped John Deere.The 3108 was actually more fuel thrifty than a 531 and 619.



[Log in to Reply]  [No Email]
Dirtjockey

12-11-2006 13:06:58




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to jddriver, 12-11-2006 09:34:03  
I can't see how kinze whipped anything? first they did not engineer the JD or the Detroit. I bet if I get a big BUD I could beat that kinze repower. HMMMMM... Now I am starting to sound like an idiot too....



[Log in to Reply]  [No Email]
jddriver

12-12-2006 05:46:45




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Dirtjockey, 12-11-2006 13:06:58  
Just look up the legal battle between deere and KINZE over some row units and a KINZE tool bar and JD.Kinze offered to help JD improve teir planter and JD did not need no back woods country boy telling them how to improve their product.Our Kinze planter is the only peice ao farm equipment we have that is not JD.Steve



[Log in to Reply]  [No Email]
Glen in TX

12-11-2006 09:46:27




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to jddriver, 12-11-2006 09:34:03  
But how long does that 3108 last or cost in the end to overhaul compared to a JD and parts availability right now? I always heard truckers whining about parts costs for those?



[Log in to Reply]  [No Email]
jddriver

12-12-2006 05:48:42




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Glen in TX, 12-11-2006 09:46:27  
2 storke Detroits are by far the cheapest and easiest deisel to overhaul and parts are very easy to find



[Log in to Reply]  [No Email]
1206SWMO

12-11-2006 07:02:24




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to Kinze And Detroit Hater, 12-11-2006 06:01:30  
Kinze and Detroit Hater,
Having another bad day?Seems like you posted the same old crap on here yesterday!!

Maybe you should drive a stock 5020 and then get on one powered by a 318 Detroit to see if you can tell any difference.The fact that JD trannies and rearends will stand up to that abuse is a compliment to how tough they were built.

In the late 60's-early 70's there were (3) JD 4020's in Illinois powered by 318 Detroits.They were used to farm with and were also 15,000 lb Unlimited class pullers and put on quite a show.They were able to pull with and sometimes beat the Allison team out of northern ILL that had MM's with V-12 Allisons in them.I have an old picture I took of one of the 4020's pulling at the 1969 M&W Gear CO pull at LaPlata,MO.He got 2nd place there.

[Log in to Reply]  [No Email]
Glen in TX

12-10-2006 22:31:16




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
We had a 5010 for 13 years and it was overhauled and repainted once in that time but had lots of different hands on it running it back then so that makes a difference. It was traded for a 6030 that only dad and I ran and was overhauled at 8500 hours and still going strong for 28 years when it was sold. That was why we kept the 6030 so long as heard about some problems with the first 619s but they fixed those later.

[Log in to Reply]  [No Email]
JDguy

12-10-2006 17:38:22




Report to Moderator
 Re: 4020-5020-6030 built tough in reply to detroit deere, 12-10-2006 17:27:54  
I'd have to add the 7520 to that group. Ran one for years and had no trouble whatsoever from the 531. Traded for a new 8640 and JD had to put in new motor after one season on the 619.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy