Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

First 5010 Built - on Ebay

Welcome Guest, Log in or Register
Author 
Stan - Florida

12-09-2006 13:21:55




Report to Moderator

Would that tractor have come from the factory with an 8-cylinder engine?

If it's a re-power (Kinze, for example), does that hurt the value of being the first one built?

Just curious, as I don't know much abour those beasts.

Stan




[Log in to Reply]   [No Email]
5020s rock

12-09-2006 23:09:24




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:21:55  
hey guys--"aint that the sh--" 41,000
dollars. it has a 6 cylinder. i have a repowered
5020 with a 318 detroit and one with a 619. yes,
they are horses! jds 531 left alot to be desired,
kinze realized this and made one hell of a tractor
with the repower. i still have brain damage from the teeth rattling noise! the neighbors used to say...that kid is nuts!



[Log in to Reply]  [No Email]
Kinze Hater

12-10-2006 06:27:15




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to 5020s rock, 12-09-2006 23:09:24  
You should be castrated,boiled in oil and shot for using anything Kinze made. Putting a Dribbletroit piece of junk in a John Deere tractor should be a felony that carries the death penalty. And all you morons that think that conversion is "cool" should be given the death penalty. You`re not John Deere people at all you`re idiots. In fact you are worse than the IH morons.



[Log in to Reply]  [No Email]
1206SWMO

12-10-2006 12:14:48




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Kinze Hater, 12-10-2006 06:27:15  
Kinze Hater,who took a leak in your wheaties?It takes a real big man to call us idiots and morons.

Lets face it,the 5010 and 5020 JD 531 engines werent the greatest ones JD ever built.They were considered way underpowered around here.Several I know put turbos on them and ended up with spun bearings and windowed blocks.That even happened to stock ones.I'll take a 318 Detroit powered 5020 JD over a stock one any day,

I have a 160 horse 1456 IH that will outwork my stock 6030 JD but that doent keep me from liking my old 6030.If I wanted to crank the 6030 up to 225 hp or put a 619 in it I could probably blow my 1456 away.

So whats wrong with 2 cycle Detroits? 10's of millions of them were built over the years and lots are still in service yet.Back in the 1960's and on up in to the mid 80's the old 318 Detroits were thick on our nations hiways.They may have leaked oil and been noisy but they got the job done for lots of trucking companies..You rarely ever see one with a spun bearing or windowed block.Its hard to kill a Detroit.

Pressurized engines are going to leak some oil.Thats a fact of life.I have an old 1966 IH C0 4000 road tractor with a 318 Detroit and its fun to fire it up and drive it around the section.

I pull a 1967 Oliver 1950 with the 4-53 Detroit in the 13,000-14,000 farm stock classes.Even though I'm out horsed and out cubed I still give the much higher horse IH and JD tractors a run for the money.

[Log in to Reply]  [No Email]
Glen in TX

12-10-2006 13:57:59




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to 1206SWMO, 12-10-2006 12:14:48  
I'd say your 6030 is a little sick? We ran a 5010 for 13 years and 6030 for 28 years and the 6030 got more done than neighbors 4x4 Case or IH in a day and broke down less. Most people didn't service the oil bath air cleaner on early 5010s like they should and the 6030 had a fault with a foam seal on air cleaner housing that needed to be all siliconed up or it would leak dirt right in past filter to the engine. The air cleaner housing and duct was the bad design by Deere but not the engine! I remember the red ones had poor air cleaner designs that leaked ruining engine too...none were perfect designs for sure. Always a wink link in every one if you look hard enough.

[Log in to Reply]  [No Email]
1206SWMO

12-10-2006 17:50:47




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-10-2006 13:57:59  
Glen, The old 6030 doesnt use a drop of oil so the engine must be decent.I'm going to put in new fuel filters and an air filter plus maybe crank the fuel up a little.My 1456 pulls my 24' field cultivator better than the 6030 and it really shouldnt.

I havent dynoed my 1456 so it could be running 180 horses or more.Its real stout.



[Log in to Reply]  [No Email]
Bob

12-10-2006 10:52:08




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Kinze Hater, 12-10-2006 06:27:15  
Oh, come on, now, Hater, tell us how you REALLY feel!



[Log in to Reply]  [No Email]
1206SWMO

12-09-2006 15:06:18




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:21:55  
It has the correct engine in it,just a typo for number of cylinders.

Kinze had a kit to put 8V-71 (318) Detroit V-8's in 5010-5020's.I've even seen them in 4020's.Theres a 5020 with a 318 about 30 miles from me and its a horse.



[Log in to Reply]  [No Email]
Glen in TX

12-09-2006 13:33:14




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:21:55  
That has to be misprint. Bad dark pics but all I could see was regular 531 in it yet with Roosa master pump up on front RH side. Don't think it would be bringing that price with wrong engine. All 5010, 5020, & 6030 were originally built with a 531 c.i. JD engine all the way through production with later ones being turboed and intercooled. Seen some conversions on 5010 & 5020, most coming out of Kansas with some kind of Caterpillar V8 engines. Many later were converted to JD 6 cyld. 619 engines same as used in the 4 wheel drives because JD and aftermarket never made a discount engine kit for the 531 engine making it costly to overhaul later on.

[Log in to Reply]  [No Email]
Handsome Jim

12-10-2006 10:11:53




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-09-2006 13:33:14  
I can't imagine how putting a short stroke V8 in place on an inline would be any improvement. I'm no mechanic, but wouldn't they be coming up way short on low end torque? HJ



[Log in to Reply]  [No Email]
Glen in TX

12-10-2006 13:41:03




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Handsome Jim, 12-10-2006 10:11:53  
Some that ran those 5010s with the CAT conversion said they did well. Never drove one myself but we ran a regular 5010 for 13 years and 6030 after that for 28 years. I don't know what CAT engine is was but it was had a manufactured plat on back side and part number and CAT paint on it so I figure they did several? Some came thru here from Kansas and who knows where they went next? Mexico? Haven't seen anymore of those around here in long while now.

[Log in to Reply]  [No Email]
Handsome Jim

12-10-2006 19:53:13




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-10-2006 13:41:03  
I've never driven any but I remember in the seventies Oliver used a V6 Jimmy in their 1950s and then tried the 3208 Cat in the 2255s and later in their Whites. Neighbors who ran them were disapointed.



[Log in to Reply]  [No Email]
Handsome Jim

12-10-2006 10:11:24




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-09-2006 13:33:14  
I can't imagine how putting a short stroke V8 in place on an inline would be any improvement. I'm no mechanic, but wouldn't they be coming up way short on low end torque? HJ



[Log in to Reply]  [No Email]
Blinwmi

12-09-2006 22:18:17




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-09-2006 13:33:14  
agree but 6030 did not have a 531 as the standard engine, it had a 619 just as the 7520 did. It is the only tractor that had the option of 2 different engine sizes from the factory.



[Log in to Reply]  [No Email]
Glen in TX

12-10-2006 14:05:53




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
619 first came out in the 8630 4 wheel drive. The 8430 had a "turbo built" 466 and the 531 was dropped and had run it's course.



[Log in to Reply]  [No Email]
1206SWMO

12-10-2006 08:28:57




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
6030's never ever had a 619 from the factory.I own a 6030 with the turboed 531 in it.

The two different engines from the factory were the NA 531 and the turboed 531.



[Log in to Reply]  [No Email]
95CS

12-10-2006 06:34:10




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
6030's had a turbocharged and intercooled 531 engine, as did the 7520. There were a few 6030's built with the naturally-aspirated non-turbo 531 engine, mostly for export purposes. The 619 was never factory-installed in either the 6030 or 7520.



[Log in to Reply]  [No Email]
New-Gen

12-10-2006 05:55:42




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
WHERE do some of you people COME UP with some of this misinformation!?!?? All you have to do is take a few minutes and READ THE FREAKIN BOOK before posting!!!! WHAT is so DIFFICULT about that?



[Log in to Reply]  [No Email]
Brendon

12-10-2006 04:45:24




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
As Glen indicated, the 6030 and 7520 both had the 531 engine. What you are probably refering to about the choice of engine "sizes" is the fact that the 6030 was also offered with the naturally aspirated 531 (making it essentially the same tractor as a 5020). I don't know how long this went on or how many were made this way. The "regular" 6030 and the 7520 were turbocharged and intercooled.



[Log in to Reply]  [No Email]
Glen in TX

12-10-2006 13:47:07




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Brendon, 12-10-2006 04:45:24  
Yep the natural aspirated engine on 6030 you don't see many of is shown in parts catalog as 6531D and the 6531A is the turboed intercooled 531 engine. 6= 6 cylinder
531 = cubic inch
A = turbo intercooled
D = natural aspirated



[Log in to Reply]  [No Email]
Glen in TX

12-09-2006 22:38:37




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Blinwmi, 12-09-2006 22:18:17  
The 6030 and 7520 BOTH had the 531 turboed and intercooled as standard engine and all the way thru production. See the parts catalogs yourself if a 619 was ever a option. It was not. Many you find today have been converted to a 619 because of reasons I stated above. Swing by your JD dealer and pick yourself up a copy of John Deere Tractors 1918-1994 if they still have those.

[Log in to Reply]  [No Email]
Stan - Florida

12-09-2006 13:36:52




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-09-2006 13:33:14  
Glen,

Thanks for the comeback. I agree completely with what you've said. I went back to the June '95 Green Magazine article by J.R. Hobbs, and there was no mention of a V-8. It did say that a V-6 was tried, but that idea was scrapped.

Stan



[Log in to Reply]  [No Email]
Glen in TX

12-09-2006 13:46:23




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:36:52  
Yeah didn't they try some V6 or V8s on early proto types of 4010 too? They could have tried same thing on proto type 5010 ?



[Log in to Reply]  [No Email]
Stan - Florida

12-09-2006 13:48:14




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Glen in TX, 12-09-2006 13:46:23  
I believe they did try some V block engines, at least that's what good ol' J.R. said.

Have a good day,

Stan



[Log in to Reply]  [No Email]
Bob

12-09-2006 13:28:00




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:21:55  
I only count 6 "runnners" on the exhaust manifold... am I missing something????? ???



[Log in to Reply]  [No Email]
Stan - Florida

12-09-2006 13:29:57




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Bob, 12-09-2006 13:28:00  
I agree...but the description on Ebay says it has 8 cylinders. I suspect that was a typo, don't you?

Stan



[Log in to Reply]  [No Email]
SM in Wi

12-09-2006 13:32:17




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to Stan - Florida, 12-09-2006 13:29:57  
My eyes also see a John Deere 6 cylinder engine. Walter Keller should be after this one!!



[Log in to Reply]  [No Email]
Stan - Florida

12-09-2006 13:34:03




Report to Moderator
 Re: First 5010 Built - on Ebay in reply to SM in Wi, 12-09-2006 13:32:17  
I'm sure you're right about the 6 cylinders.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy