Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1949 A Cylinder coolant leak

Welcome Guest, Log in or Register
Author 
jchantry

12-08-2006 20:10:57




Report to Moderator

1949 JD A S/N 634827 in North GA

Looking for some ideas.

Recently found some coolant in #1 cylinder, so suspected blown head gasket.

Pulled head, head gasket looked fairly good - no cracks or missing gasket material (what I have seen before in a car engine blown head gasket).

Visually inspected cylinder head and block for cracks - none found.

Hate to reassmble engine without finding source of leak.

Any ideas on how to test for the leak?

Note: Worked fine up till this, had antifreeze, coolant did not freeze.

[Log in to Reply]   [No Email]
Ken Thies

12-09-2006 13:05:14




Report to Moderator
 Re: 1949 A Cylinder coolant leak in reply to jchantry, 12-08-2006 20:10:57  
Check the pushrod tubes in the head.



[Log in to Reply]  [No Email]
Jim Broughton

12-08-2006 20:29:43




Report to Moderator
 Re: 1949 A Cylinder coolant leak in reply to jchantry, 12-08-2006 20:10:57  
Check your cooling tubes !! Best of luck, those old "A"s are tough !! Jim B.



[Log in to Reply]  [No Email]
jchantry

12-08-2006 20:56:11




Report to Moderator
 Re: 1949 A Cylinder coolant leak in reply to Jim Broughton, 12-08-2006 20:29:43  
Forgot to mention, it has a powerblock 6"-2.

I could not see any cooling tubes, could you explain, or does a powerblock not have them?

Also, Where can I get rings for this engine since it has 6" pistons?



[Log in to Reply]  [No Email]
Drew

12-08-2006 21:48:02




Report to Moderator
 Re: 1949 A Cylinder coolant leak in reply to jchantry, 12-08-2006 20:56:11  
The power block has o-rings at the top and bottom of each sleeve. It is possible that one of these o-rings is leaking coolant.

Hastings will probably have rings to fit the power block pistons. BUT, just about every power block piston I have seen has ring lands that are pretty much shot. If the ring lands are shot, new rings arent going to help much.

Im guessing the cooling tubes that Jim mentions are pushrod tubes, which the model A does not have.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy