Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

720 Std 3 point question

Welcome Guest, Log in or Register
Author 
wilamayb

11-30-2006 20:28:31




Report to Moderator

I just purchased a cherry of a 720 standard diesel only about 25 miles from my house. I has single SCV, PTO and a rockshaft but some individual took not only the three point, they also took the arms that spline onto my rockshaft. I read in the archives that the std. tractors require a special arm to spline onto the rockshaft. If so where in the world would I get one? Just how rare are these old standard diesel gals with a rockshaft?

Thanks so much for your help. I'm forever thankful for you all.

[Log in to Reply]   [No Email]
Mark 2 in Ohio

12-01-2006 13:54:00




Report to Moderator
 Re: 720 Std 3 point question in reply to wilamayb, 11-30-2006 20:28:31  
Hi, I have a JD 720 D standard and it has a 3 point on it...but I used the regular rockshaft arms and they work fine....you dont need the $600 pair of standard arms. You dont need to cut the ear off....
I can send you a picture of the 3 point I put on it.



[Log in to Reply]  [No Email]
2cylinderlp

12-01-2006 11:10:26




Report to Moderator
 Re: 720 Std 3 point question in reply to wilamayb, 11-30-2006 20:28:31  
I can only speculate being from the midwest where we mostly have rowcrops. The standard tractors designed mainly for pulling and used in the western states were probably often sold without a rockshaft. I have a 730LP standard that does have the optional rockshaft. The arms that you speek about are different from a row crop. The extra "ear" that is on the rowcrop style is not on the type used for a standard tractor. It can't be on there because I think it would hit the operator platform. I suppose you could cut that "ear" off the row crop style. Those standard variety arms are going to be a little hard to come by.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy