Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4400 combine guage lights

Welcome Guest, Log in or Register
Author 
jd 4400

11-05-2006 22:23:51




Report to Moderator

I am trying to fix the light in the temperature guage in my 4400 combine. My technical manual says they are fiber optic. The light in my oil pressure guage works.(gas guage light doesn't need to work) Can anyone give me advice on how to get this fiber optic light working. Thanks.




[Log in to Reply]   [No Email]
jd4400

11-08-2006 19:41:15




Report to Moderator
 Re: 4400 combine guage lights in reply to jd 4400, 11-05-2006 22:23:51  

All three of the fiber optic lights are lighting, but two of them are so dim they do not light the guage. I ordered two replacements from John Deere. I will get them Friday. I will report back when I get them installed.



[Log in to Reply]  [No Email]
Bob

11-06-2006 00:04:10




Report to Moderator
 Re: 4400 combine guage lights in reply to jd 4400, 11-05-2006 22:23:51  
Have you actually looked at the gauge? Either it has it's own small lampholder, or it IS lit by fiber optics.

There's NO mystery to the Deere fiber optics gauge illumination system. It simply is a lampholder with the lamp surrounded by nipples that individual fiber optic "light pipes" plug into, and extend to the individual gauges.

If your's is set up like this, and the light that illuminates the fiber optic "light pipes" is working, and a gauge is not being lit, the individual "light pipe" from the central bulb to that particular gauge is likely out of place, or missing altogether.

IIRC, some Deere stuff is set up so the bulb in the tach provides the light for the "light pipes" leading to the other gauges.

Take a look, and see how your's is set up.

[Log in to Reply]  [No Email]
jd 4400

11-06-2006 11:45:58




Report to Moderator
 Re: 4400 combine guage lights in reply to Bob, 11-06-2006 00:04:10  
Thanks Bob for the reply. Yes, I do in fact have the fiber optic bulbs. Both tachometer lights work. The technical manual says the guages do get their feed from the tachometer lights. All the light wires or tubes to the small guages(oil, temp., and fuel) SEEM to be intact. Only the light to the oil pressure, which is the middle guage, works. I will investigate further tonight in the dark, when I can better trace the light. Excuse my ignorance of fiber optics. One more question: are the fiber optic bulbs of a design that there is nothing to burn out or can they go bad? Thanks again Bob.

[Log in to Reply]  [No Email]
Bob

11-06-2006 22:25:14




Report to Moderator
 Re: 4400 combine guage lights in reply to jd 4400, 11-06-2006 11:45:58  
The "fiber optic light guides" are simply a bundle of glass or plastic fibers enclosed in a sheath that pick up light from a source, such as the light bulb in the tach, and "pipe" it to a remote location... in this case, one of the other gauges.

So, if the bulb that is the light source is lit, and the fiber optic light guide is in place, light SHOULD be coming out the other end, lighting the gauge.

[Log in to Reply]  [No Email]
jd4400

11-15-2006 19:46:59




Report to Moderator
 Re: 4400 combine guage lights in reply to Bob, 11-06-2006 22:25:14  
Well I got two new repacement fiber optics(a tube or wire about 8 inches long with something on each end) from John Deere. I installed them and now my guages light. The old ones were tightly installed on both ends and had no obvoius crimps or damage of any kind. Instead of getting light from the tachometer guage bulbs, the fiber optic tubes have a seperate light bulb(#194 type) which was good and I did not replace. The bulb holder plugs into the recepatcle which the fiber optic tubes fit into. So $39.00 later($19.50 X 2) I have guage lights.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy