Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Big Thanks to Glen in TX

Welcome Guest, Log in or Register
Author 
Gord in Ma

10-16-2006 19:04:18




Report to Moderator

Thanks again for the help on the oil pressure for my 42 B. Apparently, I had turned the oil pressure the wrong way during an earlier adjustment. I turned it clockwise and the pressure jumped right up. Now I just have some minor carb adjustment issues to deal with. Sure is good to hear it run again after almost two years.
Thanks again Glen!




[Log in to Reply]   [No Email]
texasj

10-17-2006 13:33:38




Report to Moderator
 Re: Big Thanks to Glen in TX in reply to Gord in Ma, 10-16-2006 19:04:18  
glen is a good guy.



[Log in to Reply]  [No Email]
Glen in TX

10-16-2006 19:13:00




Report to Moderator
 Re: Big Thanks to Glen in TX in reply to Gord in Ma, 10-16-2006 19:04:18  
Hope that's all it was and continues to run good for you again. Yep low oil pressure on engine just makes you feel not well till it's right again just like the ole blood pressure. If need to go into more internals later never hurts to pick up a copy of the I&T JD-4 shop manual for JD A,B,D,G,H,M & MT tractors. Lots of carb remedies on here in archives and some simple tests you can run also stuck over on Pat's H site that will help too.

[Log in to Reply]  [No Email]
Gord in Ma

10-16-2006 20:04:41




Report to Moderator
 Re: Big Thanks to Glen in TX in reply to Glen in TX, 10-16-2006 19:13:00  
Great info on the carb. This is the best site goin for keeping these tractors runnin..... thanks again Glenn!



[Log in to Reply]  [No Email]
Glen in TX

10-16-2006 21:07:29




Report to Moderator
 Re: Big Thanks to Glen in TX in reply to Gord in Ma, 10-16-2006 20:04:41  
Thanks for that site and info goes to Pat and others for taking time to get it there.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy