Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A???

Welcome Guest, Log in or Register
Author 
THE JUNKMAN

09-06-2006 08:36:00




Report to Moderator

Does anyone know where to find a good wire diagram online or could someone e-mail me one? I have a 49 JD A. The generator wiring is throwing me. Is there suppose to be a wire going from the side of X wico mag to something? I see that there is a stud on the side of the mag. Thanks
Jim
[email protected]




[Log in to Reply]   [No Email]
F-I-T

09-06-2006 13:19:14




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to THE JUNKMAN, 09-06-2006 08:36:00  
third party image

Maybe this will help. I always felt the key was to get it running, and then you can practice shutting it off.

BTW, none of my gas cars ever turned off the fuel to stop, though I like to close the shut-off valve on the tank when it's a long period between sessions. Letting a lungful of distillate in a cylinder was not a good way to guarantee your next cold start, but any gasoline should be long gone after a warm engine boils it for a minute or two.


Frank

[Log in to Reply]  [No Email]
THE JUNKMAN

09-06-2006 13:25:24




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to F-I-T, 09-06-2006 13:19:14  
Excellent. I do have this already, but it does not show the connections from the voltage regulator to the actual generator post. This is a 12 volt system AND one other this was this a 12 volt + ground system?



[Log in to Reply]  [No Email]
F-I-T

09-06-2006 15:37:18




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to THE JUNKMAN, 09-06-2006 13:25:24  
third party image

This diagram and the tractor as originally wired was a 12 volt, positive ground system.

You have to read between the line a bit, but it is in your book. Looks to me that the field wire, which is farthest from the VR, down the side, connects to the first terminal towards the tractor.

If you do not have a four legged voltage regulator as was originally supplied, and you have a newer three legged VR instead, you can connect the black wire to the terminal called the "ARM" terminal.

The "F" lead on the generator will connect to the VR "FLD" terminal, and the "A" or larger post of the generator will connect to the "ARM" post.

Frank

[Log in to Reply]  [No Email]
Glen in TX

09-06-2006 12:20:37




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to THE JUNKMAN, 09-06-2006 08:36:00  
Kill terminal on the mag. NEVER hook up battery voltage to a magneto because it doesn't require external power and you will you will fry it in short order if you do.



[Log in to Reply]  [No Email]
John T

09-06-2006 11:10:36




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to THE JUNKMAN, 09-06-2006 08:36:00  
Junkman, to answer your question NOOOOO no wire is required to run from the mags lil side "kill switch stud" HOWEVER its a good safety feature if you do run one from it up to the dash where a key or toggle or "push to kill" switch may be installed to kill the mags spark if that circuit/wire becomes shorted to frame ground. Its also possible to mount a lil metal springy thingy on that kill switch stud which kills the spark when its depressed cuz it again shorts out to frame/mag case/ground.

Regardless if it has a kill switch stud or a dash kill switch of some sort or not, I shut mine off by turning the gas off at the sediment bowl etc and let it run out of fuel to die. Some people simply have the throttle stop plate n carb adjusted so if the throttle is pulled back far enough she will die also BUTTTTT EITHER THAT OR USING A KILL SWITCH leaves some raw fuel in the cylinders which can wash the oil n seal off the rings n cyliners

BOTTOM LINE SUMMARY: No kill switch is required buttttt t its a safety feature and even if it has one, I suggest to turn the gas off n let her run out of fuel to stop her.

John T

[Log in to Reply]  [No Email]
P Browning

09-06-2006 08:55:51




Report to Moderator
 Re: DOES ANYONE HAVE A WIRE DIAGRAM FOR 49 JD A??? in reply to THE JUNKMAN, 09-06-2006 08:36:00  
JUNKMAN -- See pages 44 - 47 of your PC 675 Parts Catalog for wiring diagrams.

On the magneto -- what you are seeing is probably a terminal for a "kill switch", and I don't believe your Operator's Manual wants you to stop your tractor by use of grounding out the magneto. See below an excerpt from the JD-H Restoration Guide, 2nd Edition, under the Q&A Section:

5. SHOULD I USE A "KILL SWITCH" TO STOP THE ENGINE? Your operator's manual will flatly say, "do not stop the engine by shorting the magneto". And before this statement is a reference to using low cost fuels, this coming in the paragraph that tells you to shut off the fuel supply and allow the engine to stop -- leaving the combustion chambers dry and free of unburned fuel. Using the recommended shut-off procedure for operation with gasoline will result in fewer starting problems and improved lubrication of the engine when first started. For some operators, however, having a switch to short the ignition is a SAFETY switch to prevent injury. Without supervision, unqualified persons (such as children) have been known to take the tractor for a joy ride. Very young people DO have what it takes to start the JD "H" tractor!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy