Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

620 fuel gauge not reading correctly

Welcome Guest, Log in or Register
Author 
jdjack

09-04-2006 18:53:42




Report to Moderator

Working on 620 fuel gauge, Gauge is good. When grounded goes to E and unplugged goes to F.

Checked resistance of sending unit with empty tank
reads 5 ohms. So i take it that this is a 0-30 ohm system. 5 ohms puts it between 1/4 and 1/2.
removed tank and sending unit. Did sweep test with dvom and never got below 5 ohms. and will read way over 30 ohm when put to full. So I took sending unit apart and it is very rusty and green inside.The resistor that lever slides on is broken.
If the sending unit is good should it read 0 when arm is all the way down?

Does anybody have a part number for a replacement sending unit, or one that they want to sell, please E-mail me.

Thnaks jdack

[Log in to Reply]   [No Email]
CLW

09-05-2006 21:27:39




Report to Moderator
 Re: 620 fuel gauge not reading correctly in reply to jdjack, 09-04-2006 18:53:42  
The parts book shows F2167R.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy