Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

85_Ranger4x4, 2 row round tube cultivator

Welcome Guest, Log in or Register
Author 
Leroy

08-13-2006 17:52:44




Report to Moderator

Just found and got home my book on the cultivator. The book is dated 11-37 and is the round tube for the A & G tractors. It is called a AG-290 Series Two-Row Tractor Cultivators and includes the following Serial Numbers: AG-291, AG-292, AG-294, AG-295, AG-296, AG-298. The cover of the operators manual calls it a serial number but I would call it a model number. This list will be model No. first, then No. and type of front shanks, followed by no. @ type of rear shanks, then total number of shovels.

AG-291; 11 spring trip; None, 11
AG-292; 8 spring trip; 3 spring trip; 11
AG-294; 8 spring tooth; 3 spring tooth; 11
AG-295; 11 11 spring tooth, none; 11
AG-296; {4 spring trip}@{6 spring tooth}; 6 spring tooth; total 16
AG-298; 8 spring trip; 6 spring tooth; 14

Above models can be set for 34"; 36"; 38"; 40"; 42" rows

The AG-296 Cultivator is equiped with special rigs and shields and in adition to the above row spacings, it may be set for 28" rows when used on the model "A" tractor. This is true of the AG-296 omly, and does not apply to any of the other cultivators listed above.

At the time of this book the only B was the short frame tractor and used a different cultivator, I think it would fit the later long frame tractor. The book also covers hand lift or power lift units. Was going to include information on square bar but carring into house was misplaced in the hundred plus books I was carrying in. If I find it soon I will post that information and that book was dated 1944

[Log in to Reply]   [No Email]
85_Ranger4x4

08-14-2006 12:19:16




Report to Moderator
 Re: 85_Ranger4x4, 2 row round tube cultivator in reply to Leroy, 08-13-2006 17:52:44  
Hey thanks alot. It is missing the very outside shank, the clamp that mounts to the square rod is there but not what goes into the clamp. We cultivate with a 1946 B, will it go on there? It would be mainly for show, we would probably use the other newer style one for actual work.



[Log in to Reply]  [No Email]
Leroy

08-14-2006 16:35:29




Report to Moderator
 Re: 85_Ranger4x4, 2 row round tube cultivator in reply to 85_Ranger4x4, 08-14-2006 12:19:16  
I would think it would hang on to the frame and the 46 would be like the unstyled A in length but the brace rods for the front would not fit, you would have to ad length to them and bend the ends to get a fit. On your 46 do you have power lift, power trol or no lift? I had power trol on the 46 B that I had.



[Log in to Reply]  [No Email]
Leroy

08-14-2006 05:48:16




Report to Moderator
 Re: 85_Ranger4x4, 2 row round tube cultivator in reply to Leroy, 08-13-2006 17:52:44  
The square bar was showen in 1940 adds for the A, B, @G tractors with a 2 row cultivator, the 4 row was still the pipe frame.

In 4-46 Book it says Steetin up and operating John Deere AB200 Series Two-Row Cultivators for Models "A", "B", and "GM" Tractors, the following is same as first listing but with row width following.

AB201; 11 spring trip; none; 11; 28"-42"
AB202; 8 spring trip; 3 spring trip; 11; 34"-42"

AB204; 8 double spring; 6 single spring; 14; 34"-42"

AB207; 9 spring trip; 4 single spring; 13; 34"-42"

AB208; 8 spring trip; 6 single spring; 14; 34"-42"

AB212; 8 spring trip; 3 spring trip;11; 28"-42"

AB214; 11 single spring; 4 single spring; 15; 28"-48"

AB216; 11 spring trip; 4 single spring; 15; 28"-48"

AB218; 4 spring @ 7 single spring; 6 single spring; 17; 28"-48"

AB201, no rear rigs
AB207, AB214 Ab216, 2 rear rigs
AB202, AB204, AB208,AB212, AB218, 3 rear rigs.

The quick tach book dated 7-50 is A200; B200, and G200 Series for "A", "B", or "G" tractors and includes the following

A, B or G201
A, B or G202
A, B or G203
A, B or G204
A, B or G205
A, B or G207
A. B or G208
A, B or G210
A, B or G212
A, B or G214
A, B or G215
A, B or G216
A, B or G218
with the A, B or G 215 for rows to 60" apart

Can post shank type and numbers if interested+

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy