Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

620

Welcome Guest, Log in or Register
Author 
william young

08-04-2006 14:42:52




Report to Moderator

I was wanting to know if any one could help me out. I grew up on Farmalls but I have worked on all. One has realy gotten me it was a john deere 620. my grand father and I worked on it when I was in 5th grade. The owner passes on and his son contacted us wanting to know if we wanted to buy it back. I would like to buy it but I dont think it is worth what they want for it. It has been sitting in the barn for 11 years now. the motor whent bad and it no longer runs. I went buy to look at it. the paint still shines as if it were just painted. They want 3000 for it, but for a nonrunning tractor that seems high to me any idea what to ofer

[Log in to Reply]   [No Email]
JCKS

08-08-2006 02:14:41




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
Buy it. About 3-4 years ago I bought a 620 at a consignment auceion for $4250 and don't know what I'd do without it. Parts are readily available and evev some aftermarket sources.Pretty simple to work on, I wish the brakes on my 4020 were as easy to get to.Around here two cyl. tractors still have good resale. Good Luck!! Jim



[Log in to Reply]  [No Email]
William Young

08-06-2006 10:52:18




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
like I said I grew up on farmalls I bought a 560 diesel that had nothing wrong with it for 1500 from a guy down the road and it isnt new by any means but it has way more power and I can use it to round bale and all. Tractors around here are normaly cheep. If you guys say it is worth $3000 I will have to pass I just cant pay that for a nonrunning tractor no matter if it meanes somthing to me or not. Thank you all for all your input

[Log in to Reply]  [No Email]
Island A

08-06-2006 06:05:07




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
You would be surprised how easy it is to get one of these things running. If the tractor is complete it is easily worth $3000. You could sell the 3 point and weights and instantly make back $2000 if the cost was just to much to handle.
I just bought an old A for $400. It is a basket case, no tires, rims no good. No sheet metal or seat. New plugs, new gas, spin the flywheel, she started.



[Log in to Reply]  [No Email]
JD A

08-05-2006 16:00:04




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
In my opinion $3000 is reasonable if not in bad shape. The motor problem could be very simple and take as little as an hour to fix. Like the guys said some quick math- $800 - $1000 for 3-point,same for 3-piece weight set $200-$300 for top link, and if the paint is good it would be bought.



[Log in to Reply]  [No Email]
machinery-man

08-05-2006 15:10:26




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
I would recommend passing on tractor and buying one in better shape. You should be able to buy a decent on for around $5000 and you"ll have more than that in the tractor with little work.



[Log in to Reply]  [No Email]
Wiliam Young

08-05-2006 08:43:11




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
they said that it was running one one cylender, and then it just up and quit, It wont turn over I tried that so Im guessing it has major damage inside



[Log in to Reply]  [No Email]
buickanddeere

08-05-2006 13:11:32




Report to Moderator
 Re: 620 in reply to Wiliam Young, 08-05-2006 08:43:11  
Odds are it just had some dirty gas dumped into it or somebody installed DU series Champion plugs. Any engine will stick if left sitting long enough . Purchase it or wish you had.



[Log in to Reply]  [No Email]
buickanddeere

08-05-2006 07:46:21




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
Any clues to why it doesn't run or is it stuck? We picked up a 40 T wide front cheap because the owner used Champion dual gap plugs. Hasn't fouled an Autolite 216 since.



[Log in to Reply]  [No Email]
William Young

08-04-2006 20:37:26




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
the tires are ok not good but dont hold aie but again has been sitting for some time, it isnt a wide ft it dose have 3 point and a top link, I though about offering $1000 or less



[Log in to Reply]  [No Email]
uoflncolts

08-05-2006 04:54:38




Report to Moderator
 Re: 620 in reply to William Young, 08-04-2006 20:37:26  
The three point alone has been bringing over $850 and the toplink for about $250. Don't offer too low where he will get mad and keep it.

Good luck,
Ryan



[Log in to Reply]  [No Email]
DW

08-04-2006 19:08:36




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
I just bought an original 620 that had sat in the shed for the last 15 to 18 years. The asking price was also $3000. It doesn't have a 3 point or wide front end. I am working on it now, as it needed a radiator core, water pump and manifold. I feel that this tractor was worth the price because I am the second owner, and I bought it less than a mile from home. You need to determine what it is worth to you.

[Log in to Reply]  [No Email]
uoflncolts

08-04-2006 16:28:49




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
Three point? Top-link? Wide front-end? Decent tires? If it has all of those, those parts alone are worth $3000. Picture is worth a 1000 words.

I just bought my late Grandfather's original paint 620 about a month ago. The best purchase I have ever made in my opinion.

Ryan



[Log in to Reply]  [No Email]
LeJo

08-04-2006 15:27:24




Report to Moderator
 Re: 620 in reply to william young, 08-04-2006 14:42:52  
In my opinion that is way to much especially for a none runner. He is a jerk playing on the fact you will pay more than anyone else. Remember a none runner can be very expensive.
I had about the same thing happen to me but I waited it out and he will come down if he needs to sell it. Depends on tires too. Also depends on if You are going to fix it up or are you going to need help. Good luck.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy