Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Brutally honest company history...

Welcome Guest, Log in or Register
Author 
Bob

07-28-2006 22:08:34




Report to Moderator

I also posted this on the Farmall Forum. I'm not trying to stir up anything, I like IH stuff (ALMOST) as much as my Deeres. I just thought CNH was being unusually frank about their corporate history... scroll down to "1958" at the link below:




[Log in to Reply]   [No Email]
machinery-man

07-29-2006 06:20:31




Report to Moderator
 Re: Brutally honest company history... in reply to Bob, 07-28-2006 22:08:34  
looks like IH knew that JD was going to discontinue the 2 cylinder before the public. An old buddy of mine said JD test the 4 cylinder for a few years in their combines...I guess around 58 was the majic year for expansion.



[Log in to Reply]  [No Email]
WV2cyl

07-30-2006 10:31:07




Report to Moderator
 Re: Brutally honest company history... in reply to machinery-man, 07-29-2006 06:20:31  
I have a 4 cyl. engine from a 35 pull combine that looks like 2 dubuque engines put together, even used a double water outlet for the radiator that looks like 2 dubuques put together. The rear is exactly the same as the dubuque bell housing and the front is nearly identical to the Dubuque engine. I am thinking of putting the 4 cyl in an old 430 I have and would only have to do minor changes and have a new hood made, Should shake up some people at a show.

[Log in to Reply]  [No Email]
msb

07-29-2006 07:27:31




Report to Moderator
 Re: Brutally honest company history... in reply to machinery-man, 07-29-2006 06:20:31  
More than once did Deere test components in both combines and construction equipment before they were used in their #1 product, farm tractors.The 12 volt diesel starter was tested in 105 combines before it was incorporated in the 1969 and up tractor line as was the model C injection pump in some construction equipment before 1969 tractors.That was one they should have still be testing, including the "famous" CB pump.lol.I was told by a Deere engineer to look for a 12 system if it proved out long before it hit the market.He was right.

Thanks Bob for the link.In my opinion, it was the difference in their engineering staff that let Deere out sell IHC. Harvester stuck to some old technology entirely too long including pre combustion chambered diesel engines,open center hydraulics, spur gear transmissions and bull gear final drives.A great idea ,but a weak and poorly designed torque amplifier didn't help either.

[Log in to Reply]  [No Email]
mjbrown

07-29-2006 08:21:11




Report to Moderator
 Re: Brutally honest company history... in reply to msb, 07-29-2006 07:27:31  
Conservative management at Deere kept them in the two cylinder mode far longer than they should have and was willing to concede number one to IH. When Bill Hewitt became boss of Deere in the early fifties he was willing to give his engineers the green light to start with a clean sheet of paper and completely redsign the Deere tractor line. The new line was supposed to come out in fiftyeight but wasn't ready so they restyled the 20 series into the 30's to try not to lose market share against the new IH models until they had the New Generation tractors ready. By completely scrapping their tractor line and starting from scratch Deere stole a march on IH.

[Log in to Reply]  [No Email]
msb

07-29-2006 22:14:38




Report to Moderator
 Re: Brutally honest company history... in reply to mjbrown, 07-29-2006 08:21:11  
Think it was Red Buttons in the first John Deere Day movie about the new Generation of Powerin the winter of 1960-61 that said the tractors would be o.k. if the rubber bands didn't break or something to that effect.Deere did have some problems with o-rings that was at least partially responsible for the company not being able to release the New Generation on schedule.
A very good friend(dealer's son) supposedly has several John Deere Day movies.Think I might see if I can borrow them for a bit.I hope he has that movie in his collection. It showed a lot of the manufacturing process of the 10 series as I recall.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy