Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

420W dual touch o matic

Welcome Guest, Log in or Register
Author 
Bruce Giese

07-25-2006 06:59:14




Report to Moderator

while replacing a cracked spacer,its the part that the quadrant bolts to.I found I'm missing a few parts 2 out of 3 of the friction disc's were oil soaked and one was missing, after consulting my parts book and getting the friction disk number I noticed a spring and a anchor #69 and #57 my question is what are they for and do I need them. thanks for any info




[Log in to Reply]   [No Email]
Wayne in Tn.

07-25-2006 12:33:17




Report to Moderator
 Re: 420W dual touch o matic in reply to Bruce Giese, 07-25-2006 06:59:14  
That is number 56 anchor. No - you do not need the anchor or spring, however this was added to help keep the slack out of the load control linkage and to stop the lift from surging up and down.
You could make an achor and use any type spring to do this.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy