Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

B gear noise

Welcome Guest, Log in or Register
Author 
Mike Smith

07-10-2006 05:00:18




Report to Moderator

Looking at an unstyled '35 B. I have not seen it in person yet. The owner says it has some gear noise in all gears but says this is normal because of the straight gears. He says he has a '36 B and it sounds the same as it. I have never driven one so I don't know what is normal sounding if anything.

Thanks in advance,

Mike




[Log in to Reply]   [No Email]
machinery-man

07-10-2006 14:31:42




Report to Moderator
 Re: B gear noise in reply to Mike Smith, 07-10-2006 05:00:18  
Have been through several transmission. If you replace part of the gears you can get noises. The gears should be replaced as a set. The heal and crown of the gears wear and in essence you start having flat gears. This is where the noise starts. The gear is no longer rolling together. About the only way to solve would be to find a lower hour tractor for parts.



[Log in to Reply]  [No Email]
Mike M

07-10-2006 06:30:12




Report to Moderator
 Re: B gear noise in reply to Mike Smith, 07-10-2006 05:00:18  
"Normal" will be very slight. And my guess is that since it was mentioned at all it is loud ? And this is more than likely due to the fact it is 70 years old and some bearings are shot and maybe even some gears. I rebuilt mine back in the early 90's and had no problem finding parts at all.



[Log in to Reply]  [No Email]
Kurt_JDB

07-10-2006 13:29:52




Report to Moderator
 Re: B gear noise in reply to Mike M, 07-10-2006 06:30:12  
Hey Mike,

I got my "51 B transmission all put back together, (thanks for your help on setting up the shifters, aligning the gates led me to the solution)

Anyway, everything works well except there is quite a bit of gear noise in all gears. I think it is the first reduction gear meshing with the clutch. I replaced a bunch of gears, all used, because there were so many damaged gears.

Bearings were all replaced, and everything was set up to specifications. Any suggestions? In your experience, will the sound decrease as things wear together, or am I "stuck with it"?

Kurt

[Log in to Reply]  [No Email]
Mike M

07-10-2006 19:02:13




Report to Moderator
 Re: B gear noise in reply to Kurt_JDB, 07-10-2006 13:29:52  
Is the noise more in the reduction gear area ? and is it worse when coasting and less when pulling ? Was your outer most bearing (the one under the little cap on the reduction cover)really shot and the cover wallered out ? Hopefully corrected. All the above seem common to me and I think the noise in the reduction area sometimes gets louder coasting from wear patterns caused by that bearing being bad for soo long. I can only take comfort in the fact that I know it is in good shape in there and the noise is from changing wear patterns. Adding fenders makes them noisy sometimes too as it amplifies it.

I also wonder if some of these were noisier than others when new ? I once had a new 212 garden tractor that was far noisier than my cousins 110.

[Log in to Reply]  [No Email]
Kurt_JDB

07-11-2006 04:53:56




Report to Moderator
 Re: B gear noise in reply to Mike M, 07-10-2006 19:02:13  
Mike,

The noise is louder when coasting, or going downhill and using the engine as a brake. Not only was the small bearing in the cover completely shot, the first reduction gear was loose on the input shaft/ gear. I had to replace both the input shaft and the first reduction gear, as the splines on both were damaged. Functionaly, everything is now good. I also replaced all the small shifter detent springs, and the shifter lever cup and seal.

I learned a lot, and remained impressed that John Deere still sells all the seals, snap rings, bearings, springs, and gaskets that I needed for the repair. They still sell some of the gears too, but they were way to rich for my blood.

Kurt

[Log in to Reply]  [No Email]
Mike M

07-11-2006 06:05:18




Report to Moderator
 Re: B gear noise in reply to Kurt_JDB, 07-11-2006 04:53:56  
I know what you mean about being impressed with still being able to get " more parts than I can afford " is how I see it.

I guess just be rest assured that it is ok and the noise is from wear patterns.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy