Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

John Deere GP wide tread restoration

Welcome Guest, Log in or Register
Author 
bill burke

07-08-2006 18:03:38




Report to Moderator

Just starting restoration of John Deere GP wide tread tractor. I need to know how this tractor was equipped when it left the factory. Would like to know what type of magneto, type of wheels, when it was built etc etc. Do I need to write to John Deere with serial number and they in turn will send me original spec. sheet? Does anyone have address for John Deere where I would send for this info?

Thank You

[Log in to Reply]   [No Email]
GPWT

07-10-2006 10:12:56




Report to Moderator
 Re: John Deere GP wide tread restoration in reply to bill burke, 07-08-2006 18:03:38  
Bill,
Duane Larson has you on the right track to get started on this project. If you have any questions on the mechanical details please feel free to email me and I will answer if possible. My email is phil.maria(at)nelsonstud.com- just sub the @ for the (at). I don't know if this defends against spammers but it's worth a shot.



[Log in to Reply]  [No Email]
GPWT

07-10-2006 10:12:39




Report to Moderator
 Re: John Deere GP wide tread restoration in reply to bill burke, 07-08-2006 18:03:38  
Bill,
Duane Larson has you on the right track to get started on this project. If you have any questions on the mechanical details please feel free to email me and I will answer if possible. My email is phil.maria(at)nelsonstud.com- just sub the @ for the (at). I don't know if this defends against spammers but it's worth a shot.



[Log in to Reply]  [No Email]
Duane Larson

07-08-2006 20:12:16




Report to Moderator
 Re: John Deere GP wide tread restoration in reply to bill burke, 07-08-2006 18:03:38  
Bill,
You have chosen a tough restoration project. The original magneto was built by Fairbanks Morse and is known as the model R2 - rebuilt ones bring $1,000 or more. You can request build information by sending your serial number to the Two Cylinder Club www.two-cylinder.com along with a check for $12 for members or $20 for non-members (I think those are the current prices). They will send you what is known about how your GPWT was equipped. Since rubber tires were not in use until late 1932, your tractor likely came on steel - several types were available. You should get a copy of Repair Catalog 50-R, which is the parts list. They are available from JD publications at 1-800-522-7448.

There is a GP rally planned for September 2006 in Indiana, and there will be several WTs there.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy