Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

620 correct tire size

Welcome Guest, Log in or Register
Author 
Smokin

04-13-2006 13:26:28




Report to Moderator

What is the correct tire size for a 620 and how much larger can one go, without looking ridiculous, for both work and casual parades?




[Log in to Reply]   [No Email]
DSK

04-13-2006 19:36:45




Report to Moderator
 Re: 620 correct tire size in reply to Smokin, 04-13-2006 13:26:28  
Most of the original row-crop 620's in my area are equipped with 13.6-38's, but there are a few with 14.9-38's. The 14.9's do not look out of place and may have been a factory option, I'm not sure. The 14.9's are somewhat taller, and in my opinion look better because the tractor stands level.



[Log in to Reply]  [No Email]
Carl NY

04-13-2006 18:34:28




Report to Moderator
 Re: 620 correct tire size in reply to Smokin, 04-13-2006 13:26:28  
Smokin- I have Firestone 15.5 x38 on 14 in. rims on the back of my 620 rowcrop. I believe 13.6 x 38 on 12 in. rims were available. The 15.5's look real good on the 620 and pull real good. In my opinion the 16.9 x 38's are alittle too big for a 620. I have had 16.9's on a 720 & they looked real nice for that size tractor. The 15.5's are a good all around size for field work or pulling. On the wide front I like to use 7.50x16's

[Log in to Reply]  [No Email]
Carl NY

04-13-2006 18:31:40




Report to Moderator
 Re: 620 correct tire size in reply to Smokin, 04-13-2006 13:26:28  
Smokin- I have Firestone 15.5 x38 on 14 in. rims on the back of my 620 rowcrop. I believe 13.6 x 38 on 12 in. rims were available. The 15.5's look real good on the 620 and pull real good. In my opinion the 16.9 x 38's are alittle too big for a 620. I have had 16.9's on a 720 & they looked real nice for that size tractor. The 15.5's are a good all around size for field work or pulling. On the wide front I like to use 7.50x16's

[Log in to Reply]  [No Email]
Smokin

04-13-2006 18:14:24




Report to Moderator
 Re: 620 correct tire size in reply to Smokin, 04-13-2006 13:26:28  
Wide front row crop



[Log in to Reply]  [No Email]
buickanddeere

04-13-2006 16:53:09




Report to Moderator
 Re: 620 correct tire size in reply to Smokin, 04-13-2006 13:26:28  
Standard or rowcrop chassis?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy