Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4x16 and a 720 D...???

Welcome Guest, Log in or Register
Author 
BushogPapa

03-09-2006 17:16:11




Report to Moderator

Semi-Mounted 4x16" JD Plow..

Is that a reasonable load for a 720 Diesel..??

Do you think a GOOD 630 could pull that same plow..??

With 15.5x38" I wonder if I can use 14" bottoms and do a good job.. I don't want to get 2 diferent plows..just one to fit both... Thanks. Ron..




[Log in to Reply]   [No Email]
Ferd

03-10-2006 16:20:41




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
Soil makes all the difference. In the midwest, where I grew up, the soil was sandy and I used to pull 5-16's with an R running in third gear. On the west coast. where I live now, we have clay and I pull 3-16's with my 730 in third (has the optional gear set) and that's all it wants to handle.



[Log in to Reply]  [No Email]
GPULLER

03-10-2006 06:31:18




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
I would say it will very with soil type. I pull a 4-16" F145 semi-mounted with my 720D. The 720 has 18.4-38's 1500lbs of wheel weights and 700 lbs of suitcase weights on the front.
Most fields it will pull the plow in 3rd but then some fields 2nd gear is just right.



[Log in to Reply]  [No Email]
Ben.So.Tex

03-10-2006 04:20:38




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
I pull 4,14 with my 730LP in 2nd gear, This tractor has the high 3rd and 5th ,Their is too much load in 3rd. My 720LP has the regular tran and it can pull it in 3rd. I don't think a 630 could pull the plow down here.
Right now it is so dry down here a bull dozer can't scratch the ground. Ben



[Log in to Reply]  [No Email]
Carl NY

03-10-2006 01:17:00




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
Ron, as everyone has stated, the type of ground you will be plowing is the big factor. The 720 should handle a set of 4-16 semimtd plow until you get into plowing sod. Bean ground & corn stubble will be OK. The 630 would better suited with a set of 3-16 plows. I suggest plenty of tire ballast such as loaading the tires and about six wheel weights. If you are going to plow at a plow days only event, you are much better off with a 3-16 semimtd plow. You will be doing a better job of plowing and be able to have ground speed.

[Log in to Reply]  [No Email]
Handsome Jim

03-09-2006 19:22:30




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
It was before my plowing days but when Dad's 730 gas ruled the machine shed Dad plowed with a 3-16 mounted plow. They were usually plowing black gumbo though. One field was so bad and tough that one year Dad hired the neighbor to plow it with his 806 IH. The next year he bought his first 4020.HJ



[Log in to Reply]  [No Email]
billde

03-09-2006 18:44:50




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
Back when we were moldboard plowing we figured it took about 15 horse per bottom for 14 inch and 20 per bottom for 16 inch. 16 inch bottoms pull considerably harder than 14's in our heavy soil.



[Log in to Reply]  [No Email]
F-I-T

03-09-2006 17:26:22




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 17:16:11  
BP:

So much depends on the ballast of your tractor, the quality of your tire tread, the status of the engine output, but probably most importantly the general condition of the soil you are working in that it's really difficult to evaluate your plow needs over the internet. If it was me and you were going to do it on a casual basis, I'd try to find a 3-14 probably a 3-16 for your tire width, because it is easier to lift, should not require any front weight, can sit cross ways on a trailer better, and it has fewer parts to sharpen and or replace.

I've seen soil where a 70D played with 4-16's and two farms away they struggled with a 4020D on 4-16's and that's a fact.

There's nearly 10 HP difference in the two tractors, and that's a 25% penalty on the 630, so that one would be forced to at least a gear lower, one would think.

Just my humble opinion, and your mileage may vary.

Frank

[Log in to Reply]  [No Email]
BushogPapa

03-09-2006 18:35:11




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to F-I-T, 03-09-2006 17:26:22  
It shouldn't take much more HP to pull 4x 16" over 4x14"...no more wearing parts to suck power, and only 8" more being turned...

I was thinking 4x16" Semi-Mounted....

I always mearured power by comparison with my WD-45..and I "HOPE" I finally have a couple of 2-Cylinder JD's that will pull at least as much as it...!! They are Fresh and ready...if they can't pull with the old Orange beast, I will Sell them... Even in good old "Yellow Wax" it will pull a 4x14" semi-Mounted in 2nd...Dry BlackJack can pull it down sometimes, but then, it Should...!! Thanks, F-I-T for the response.. Ron...

[Log in to Reply]  [No Email]
Handsome Jim

03-11-2006 18:35:35




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 18:35:11  
There were a lot of 45s in our neighborhood when I was a kid but I never did see one pull a 4 bottom plow of any kind. Maybe the guys with the D-19s did but those were few and far between. I remember before Dad bought his 4020 the AC dealer brought a 190, not an XT but a straight 190 gasser to our farm for a demonstration and I'm pretty sure they were pulling 4-16s. Can't be sure as I was probably 10 or 11 at the time.HJ

[Log in to Reply]  [No Email]
Handsome Jim

03-11-2006 18:35:43




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 18:35:11  
There were a lot of 45s in our neighborhood when I was a kid but I never did see one pull a 4 bottom plow of any kind. Maybe the guys with the D-19s did but those were few and far between. I remember before Dad bought his 4020 the AC dealer brought a 190, not an XT but a straight 190 gasser to our farm for a demonstration and I'm pretty sure they were pulling 4-16s. Can't be sure as I was probably 10 or 11 at the time.HJ

[Log in to Reply]  [No Email]
Dr.EVIL

03-10-2006 10:14:26




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 18:35:11  
Like everyone else is saying "It Depends" Best way is to compare Your 720 & 630 to Your WD-45. The 720-D should pull the same plow about 1/2 to 1-1/2 mph faster than Your WD-45, or in tough conditions, an extra bottom but slower. The fact the WD-45 has two fieldwork speeds and the 720 & 630 have 3 or 4 makes it tough to be more specific. The 630 will really struggle to keep up with the WD-45.... A 3-bottom is plenty for it. Neighbor borrowed Dad's JD 4-14 plow one day when He bought His 630 about 40 yrs ago..... Brought it back after two rounds in a 20 acre field!

[Log in to Reply]  [No Email]
BushogPapa

03-10-2006 16:02:03




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to Dr.EVIL, 03-10-2006 10:14:26  
I guess Dad was smart, when he passed on a 620 and bought his WD-45..!!! JD would not guarantee the 620 to pull 4x14, and AC did...and it ALWAYS Has, too..!! Guess I figured the JD 630 would do better...!!

Thanks..!

Ron.



[Log in to Reply]  [No Email]
Mike M

03-10-2006 06:20:45




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 18:35:11  
That sounds like one tough WD-45 ? How much HP is it putting out ?

I would think that the 720 D if it is running right should be able to drag that wd-45 AND the plow ! Those 720's weight in around 8000 lbs without fluid or weights and are really good at draging stuff as 70% of that is on the rear wheels. I can't imagine an Allis weighing anywhere near that,aren't they about 1/2 that ?

The 4 bottom should work good behind the 720 in about all conditions and may work on that 630 in good conditions,but I usually saw them with 3 bottoms. But it's all really about conditions,gearing and weight and how fast you want to go. You could pull that plow with a 5 HP Briggs & Stratton given enough gearing and weight,but it would go really slow.

[Log in to Reply]  [No Email]
F-I-T

03-09-2006 19:35:22




Report to Moderator
 Re: 4x16 and a 720 D...??? in reply to BushogPapa, 03-09-2006 18:35:11  
The other guys pretty much said what I was thinking. In the old days there were all sorts of rules of thumb to estimate plow capacity. One I remember was 1 horse per inch. If, and only if that were true when you say:

"It shouldn't take much more HP to pull 4x 16" over 4x14"...no more wearing parts to suck power, and only 8" more being turned..."

...you would be talking the difference between a 630 and 720 in power. 8" is a lot of load.

I hope you find what you need and hope you don't have to get rid of them.... :)

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy