Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Deere CAD/CAM

Welcome Guest, Log in or Register
Author 
Chuck Grimsrud

03-06-2006 16:50:55




Report to Moderator

There was an interesting article about Deere in the 3-6-06 Minneapolis Star Tribune at:>Link

I>Link sent this comment to Fred Zimmerman:Fred,
In the middle 60�s I had some first hand experience with innovation at Deere. I was a systems engineer for IBM in Cedar Rapids, IA. The Deere tractor works in Waterloo was one of my accounts along with their research lab in Cedar Falls. During one of our calls the head of the lab asked me if our computers (1620?) could do an inverse arctangent. I assured him that our system ran FORTRAN and it could handle all of the trig functions. He indicated that they were planning to design gears using the computer and that would allow them to produce gears that were smaller, would produce much less friction and therefore run much cooler and last a great deal longer. They later introduced automated production in the plant and made full use of CAD/CAM. Within the next decade the Deere tractor became the standard of the industry and the prior giants of the industry went out of business soon after. International Harvester, Alice Chalmers, Case and Minneapolis Moline disappeared from the tractor scene and Deere did not have much competition until the foreign models were introduced in the 90�s.
I can�t recall the name of the lab engineer that I talked to but I do recall he was of Dutch decent and his last name may have even started with Van.
I tell this story to young people who are interested in math but don�t know what it can be used for. I would like to hear from anyone who knows more about the Deere lab in Cedar Falls in the 60's

[Log in to Reply]   [No Email]
G/MAN

03-07-2006 07:29:23




Report to Moderator
 Re: Deere CAD/CAM in reply to Chuck Grimsrud, 03-06-2006 16:50:55  
That's correct about the computer gear design. I've read the same thing in a New Generation book. Deere was the first to write computer programming for Deere design, which saved a ton of time and money over the engineers calculating out the math to umpteen decimal points with slide-rules.



[Log in to Reply]  [No Email]
msb

03-06-2006 21:42:39




Report to Moderator
 Re: Deere CAD/CAM in reply to Chuck Grimsrud, 03-06-2006 16:50:55  
Thanks for sharing your story. Another little known fact about Deere was CEO Bill Hewitt hired the best engineers from some of the best engineering schools in the country when he first planned on bringing the Deere tractor into the Twentieth Century.He got the cream of the crop ,the best of the best, that ordinarily would have gone to Ford,GM & Chrysler.And hiring Henry Dreyfus to design the styling and operator's station was a stroke of genius on his part.Up to that point in time,it seemed like a tractor was built and a seat added as an afterthought.---Lets see, we can put the driver on here.(with little or no consideration for the safety or ease of operation for the driver)On some of those old Molines, it appeared they almost waited too late to include a seat.lol,bob.

[Log in to Reply]  [No Email]
F-I-T

03-07-2006 01:17:12




Report to Moderator
 Re: Deere CAD/CAM in reply to msb, 03-06-2006 21:42:39  
I think history agrees with you except that the Henry Dreyfus thing happened a long time before Hewitt married into the Deere family (I think he married Charles Wiman's daughter...). Dreyfus was the styling house that styled the A"s and B"s for the '39 model year. Then they styled combines and manure spreaders, etc. for lord knows how many years. Dreyfus also designed the Bell system telepone, and was Deere's answer to Raymond Loewy who styled the Pennsylvania Railroad's locomotives and IH tractors, not to mention tins of other stuff (Lucky Strike, Studebaker cars, etc.). Their work makes for some very interesting reading.

A side note, Henry and his wife committed joint suicide in 1972 when it was found that she had incurable liver cancer.

Frank

[Log in to Reply]  [No Email]
wilamayb

03-07-2006 06:19:38




Report to Moderator
 Re: Deere CAD/CAM in reply to F-I-T, 03-07-2006 01:17:12  
Speaking of Dreyfuss, I have a calendar with a picture of him working at his desk with some sketches in the early 60's. One of the pictures he had on his desk was a sketch of what looked like an 8000 series tractor. Pretty neat I thought. How long has Deere been running off his genius?



[Log in to Reply]  [No Email]
Mike M

03-07-2006 11:24:41




Report to Moderator
 Re: Deere CAD/CAM in reply to wilamayb, 03-07-2006 06:19:38  
Genius ? Maybe ? a mechanic - NOT-- He would of made those A's and B's so the hood did not get chopped to change a muffler.



[Log in to Reply]  [No Email]
F-I-T

03-07-2006 12:20:17




Report to Moderator
 Re: Deere CAD/CAM in reply to Mike M, 03-07-2006 11:24:41  
Mike:

I have to say that if a hood got "cut" to change a muffler that had to be replaced every three years or so the lack of genius wasn't from the design. I always felt it was from the dork who couldn't plan to fix it on a rainy day when he could spend that extra 20 minutes to drain the tank and lift it off. Time it someday. It does not take long to do it right. I think any tractor deerves at least that much maintenance time every once and a while. Great time to inspect all of the places for birds nests and chaff to be trpped that falls out during picking to start a fire on the manifold, too.

My Dad and uncles all had letter series tractors that they ran for 40+ years and they all had operating mufflers and no cut hoods. Guess we were the exception.

I realize that's just my humble opinion. but I do think that a lot of hoods got cut by some one in such a hurry that they cobbled up their farm work in general until they went out of business there, too.

Cranky Franky

[Log in to Reply]  [No Email]
Mike M

03-07-2006 12:58:33




Report to Moderator
 Re: Deere CAD/CAM in reply to F-I-T, 03-07-2006 12:20:17  
Yes, I do agree with that statement of the cobblers in general,but JD finally saw the error of their ways after 10 years and then on the model 50,60,70 they put a raised pad on there so you could unbolt it. The A's and B's could of been made the same way just in the middle.Even "perfect" designs have many flaws.



[Log in to Reply]  [No Email]
F-I-T

03-07-2006 16:14:54




Report to Moderator
 Re: Deere CAD/CAM in reply to Mike M, 03-07-2006 12:58:33  
Mike, I never said any design was perfect, or that that design in particular was the bomb. I do think that if you list that muffler access as a "design flaw" you have a different standard from me as to what constitutes good versus bad design.

I just never had a problem with it, and I don't think that it was a reason for most farmers not to purchase the tractor, since quite a few were sold from '39 to '52 when the 50/60/70 design came out to correct the "error". But, to each his own. I still like the styling that they ended up with on the "A", "B", "H", and "G". I think they still look pretty nice today when they are all shined up.

I CAN tell you that if I had taken a Sawsall to the hood on my dad's "A", I wouldn't be typing with these fingers today. :)

[Log in to Reply]  [No Email]
G/MAN

03-07-2006 13:37:38




Report to Moderator
 Re: Deere CAD/CAM in reply to Mike M, 03-07-2006 12:58:33  
It could have been worse. Actually, Henry Dreyfuss was absolutely against having ANY sort of vertical stack interfering with the lines he designed while "styling" the tractors. And yes, he was a genius in many respects. Instead of simply slapping new tin on, he also got heavily into the actual function and safety of the new tractors, and made big improvements in both areas. He also designed phones for Bell, the Honeywell "round" thermostat and many other commonplace products. Ray Loewy, the other major player in "industrial design" besides Dreyfuss, was contracted by I-H to do the styling on the Farmall M, H, etc.

[Log in to Reply]  [No Email]
Mike M

03-07-2006 19:17:12




Report to Moderator
 Re: Deere CAD/CAM in reply to G/MAN, 03-07-2006 13:37:38  
He did those round thermostats too !

Oh my god ! Henry's ears must be burning. And he must not of had any kids running around his house to snap them off at the little center stem. LOL



[Log in to Reply]  [No Email]
G/MAN - Take a look here.

03-09-2006 10:34:34




Report to Moderator
 Re: Deere CAD/CAM in reply to Mike M, 03-07-2006 19:17:12  
A JD "A" right in the collage on the first page of the Henry Dreyfuss Associates main page. Pretty neat - Link



[Log in to Reply]  [No Email]
G/MAN - CRIPES!!!

03-09-2006 10:36:52




Report to Moderator
 Re: Deere CAD/CAM in reply to G/MAN - Take a look here., 03-09-2006 10:34:34  
Scroll around the "dot" links circling the collage, and it's almost ALL John Deere. I knew that Deere still worked with Dreyfuss, but I didn't know to what extent. I'd like to have the cash changing hands there in a year's time...



[Log in to Reply]  [No Email]
Mike M

03-09-2006 12:20:32




Report to Moderator
 Re: Deere CAD/CAM in reply to G/MAN - CRIPES!!!, 03-09-2006 10:36:52  
One never seems to hear (at least I never) that the company Henry founded is still alive and apparently doing well and lots of work for Deere.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy