Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

70 Hydraulic Couplers

Welcome Guest, Log in or Register
Author 
Blast52

03-05-2006 13:57:56




Report to Moderator


I need help sourcing adapters that will fit in a Power -Trol 70D and be common hydraulic fittings.
Thanks in advance for any help.




[Log in to Reply]   [No Email]
j cook (iowa)

03-06-2006 08:43:38




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Blast52, 03-05-2006 13:57:56  
I still have a set of plugs, with dust covers, and attached safeway JD cone style couplers on them, which I don't need, have been intending to sell on E-Bay eventually, plus an old style hydraulic stop, low pressure cylinder with the original plug style couplers.

The couplers plug into the same fittings that the dummy couplers do.

If someone wanted them they could let me know.



[Log in to Reply]  [No Email]
F-I-T

03-05-2006 16:56:41




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Blast52, 03-05-2006 13:57:56  
third party image

You can also use a AA5724R Selector control valve (available new fo high $'s or from a salvage yard), then plumb your Pioneer fittings out of the right hand pipe plugs. You will be able to select either rockshaft or remote cylinder by turning the AA 5724 R from seated to unseated.

You can search this site archives and find tons of discussions on this subject.

[Log in to Reply]  [No Email]
Bobl1958

03-06-2006 14:45:18




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to F-I-T, 03-05-2006 16:56:41  
Frank, just wondering what you meant by turning the AA5724R from seated to unseated? Do you mean switch the plugs? Thanks for your help. Bob



[Log in to Reply]  [No Email]
F-I-T

03-06-2006 16:11:16




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Bobl1958, 03-06-2006 14:45:18  
third party image

Bob:

No, by seated to unseated, I mean when the inner stem of the AA5724R is turned in all the way, it forms a solid-nosed style plug. When you unseat it, you turn it open about three turns, or until the bottom edge of the knurled shank is even with the shoulder of the outer shell. In this position it acts as an open-nosed plug.

If you had one in your hand it would make a bit more sense, but here's a picture that might help. You don't have to pull any plugs out and lose any oil using an open nosed plug in the bottom hole, the selector valve plug in the upper, and hoses with quick fittings (originally they were Aeroquip style, but more than likely Pioneer type today). The hose from the right side plugs are generally routed under the battery box to hang free on the left side pointing rearward.

Most of this is also covered in many of the numbered series operators manuals.

Frank

[Log in to Reply]  [No Email]
Bobl1958

03-08-2006 12:15:15




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to F-I-T, 03-06-2006 16:11:16  
Thanks a million, Frank. I will look at the 60 to see what I have. I would assume the AA5724R comes with the tractor if it has hyd? I will look. Thanks again for your help. Bob



[Log in to Reply]  [No Email]
Specter

03-06-2006 12:16:25




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to F-I-T, 03-05-2006 16:56:41  
Hi Frank,

That valve would let you switch between rockshaft and remotes? I've been looking for a way to switch between the two on my 70 standard. I have some 3-point equipment that has a remote cylinder on it as well. So I could hook the 3-point up, hook the remotes up, then switch between the two by turning the valve?

Just want to be sure it would work for my 70. Luck is against me this week, so just wanted to make sure! :-)

Specter
Alberta, Canada

[Log in to Reply]  [No Email]
F-I-T

03-06-2006 12:56:34




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Specter, 03-06-2006 12:16:25  
Yes. That is how I have it configured for my 801 three point hitch using say, a scraper box, then turn the valve and use my 45W loader.

Or you could go whole hog and find a Baker Valve which sandwiches in between the P-trol box and the rear cover, and then you will have a live hydraulic outlet for the remote cylinder and an operational rockshaft at the same time.

The final option is to "tap" the pressure and return lines and use an outside valve to have control of your remote and have live rockshaft.

But, if you only need one, OR the other, the AA5724R works the slickest.

Frank

[Log in to Reply]  [No Email]
billde

03-05-2006 16:32:43




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Blast52, 03-05-2006 13:57:56  
2 sets on ebay right now.



[Log in to Reply]  [No Email]
Ty Kolbe

03-05-2006 14:38:00




Report to Moderator
 Re: 70 Hydraulic Couplers in reply to Blast52, 03-05-2006 13:57:56  
What I did on my 70D's is get the plugs that go into the power trol and then a short nipple and then a coupler with pioneer ends then I can hook everything up. My power trol plugs I bought from the dealer or maybe check ebay. Nipple from hardware store and the coupler I also got from the dealer.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy