Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Boling Machine Shop

Welcome Guest, Log in or Register
Author 
woodbutcher

02-28-2006 12:27:17




Report to Moderator

I've heard about the improved seals made by Boling Machine Shop for at least 10 years. I've read about them in Farm Show magazine. So I finally decided I'd try a set. I ordered a load control shaft and a set of the seals. I received my order after about a week, and I installed the parts. They seem to work fine.
Then a few days later I received another duplicate order. I noticed on my credit card bill I had been charged for two of each part.
I've tried to call them several times in the past couple of days, and get their answering machine. I've left my number but received no call back. I'm beginning to think I made a mistake buying parts from them. Has anyone else had a similar problem? Does anyone need a set of seals and a load control shaft for a 3010. You'd still need to buy replacement bushings from JD.

[Log in to Reply]   [No Email]
twopop

02-28-2006 16:37:43




Report to Moderator
 Re: Boling Machine Shop in reply to woodbutcher, 02-28-2006 12:27:17  
delt several times with them,havnt had a problem. dis loose some seals in the mail,they replaced them free.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy