Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

39 B Camshaft Question

Welcome Guest, Log in or Register
Author 
JDPigfarmer

02-27-2006 05:40:46




Report to Moderator

I have a 39 B camshaft and the two exhaust lobes are flatteron top than the intake lobes. I have been to a salvage yard and looked at 6 cams and they are all flat similiar to mine. I am looking for info if this is normal on a 39 B or not. If not were to find a new or reground cam. Thanks for any info.




[Log in to Reply]   [No Email]
Mike M

02-27-2006 05:51:19




Report to Moderator
 Re: 39 B Camshaft Question in reply to JDPigfarmer, 02-27-2006 05:40:46  
If you saw 6 and they looked just like yours than I'd have to agree that it was made that way.

I also remember the ones I've seen were different on the intake than exhaust. If your lobes are smooth and not grooved up and the same height on both sides I'd put it back in and run it. Or you could send it off to Robert's and get it reground. It's your dollars ????



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy