Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

227 picker differences

Welcome Guest, Log in or Register
Author 
Superpicker

02-26-2006 18:06:05




Report to Moderator

I am looking for any major differences (design, appearance, styling, etc.) that took place during the construction run for the 227 picker. Please all who know chime in here. Were all 227 able to be used on all A, B, 50-730, and 2010-4010?Also fit 3020-4020? tractors or were the older ones non-fit? What to look for when I go 227 hunting? (so it will fit on a 630).
Correct to say 227 was built 1954 until 1964? Was 237 1964 until ?
Thanks to all who respond because these were built before I was born.

[Log in to Reply]   [No Email]
Superpicker

02-28-2006 20:18:26




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
Thanks for all the great information guys. That was exactly what I was looking for. The voices of experience know the way.
Randy,
Thanks for the offer on the 227. I wish I was a little closer to you. I am on the IN/OH border.
I hope to find a supersnoot with a couple I intend to look at.
A little research the last few days may have me possibly checking in on a 227 off a 620 less than 30 miles away and a 237 in my county. Will have to check on brackets for this.

[Log in to Reply]  [No Email]
matt720d

02-27-2006 18:06:44




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
I HAVE A 227 WITH A 50 SHELLER ATTACMENT ON A 720LP BOUGHT BOTH FROM ORIGINAL OWNER BOTH HAVE ALWAYS BEEN TOGETHER, IT IS AN EARLY ONE NO MULTI LUBERS HAVE ALL THE SHEILDS RAN IN FIELD LAST SEASON, 230 BUSHEL CORN FIRST GEAR GAVE 720 WORKOUT ALSO HAVE TWO 237 ON 70 GASES, ONE REAL EARLY AND ONE TOWARDS END OF PRODUCTION,I WOULD TRY TO FIND ONE WITH UNIVERSAL MOUNTS THAT USE HYD CYL TO RAISE AND LOWER RATHER THAN THE ROCKSHAFT MY 720 HAS THE ROCKSHAFT STYLE MOUNTS AND THE HELPER SPRINGS THAT ARE ALWAYS BREAKING, THEY ARE FUN TO RUN JUST VERY DIRTY AND NOISY, ALL THREE OF MINE HAVE THE M&W SUPER SNOT, THE 227 DOES LET YOU WORK ON TRACTOR EASYER AS THE 227 HAS LOWER SHEILDING AS THE 237 IS HIGHER THEY ARE BOTH FUN

[Log in to Reply]  [No Email]
Johnnydee_84

02-27-2006 13:22:14




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
go with billonthefarm

A 237 is a great picker but it is does not look as good as a 227. The 227 as also the picker that would have been bought new with the 630. That is important in making an exibit more correct. The gravity wagons may require a little work done to the tongue and the side extension but is really not a problem. That is what we use.



[Log in to Reply]  [No Email]
billonthefarm

02-27-2006 06:50:39




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
superpicker Your production years are real close. The 227 was intoduced in 53 but I dont know how many. The 237 was 64 until 73. The 227 picker didnt change to much from start to finish. Of course there are small changes but nothing too serious. The 227 picker will fit an amazing number of tractors, it would be quicker to tell you what it wont fit. There was no subframe designed for a B, G, or 320-330. Other than that, from A serial number 488,000 till the last two cylinder it should fit every deere with the appropriate subframe. It would also fit 2010-3010-4010-3020-4020. It should be easy to find one for a 630. A subframe for a 60-620-630 should all interchange with one another. As you look for a picker the best advice I can give you is be patient. There are alot of 227's out there. Find a good one. These pickers are a alot of fun to use but they also can be alot of work even if they are in good condition. If you can find one with the multi luber, that will save ALOT of crawling around with a grease gun and if you can find one with the spiral stalk rolls instead of the old style it will shell less corn. I have one and use it on a 70 and it is a true joy to use. Good luck, if you have any questions just holler! bill

[Log in to Reply]  [No Email]
Randy Varilek

02-26-2006 21:00:14




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
If your looking, i have a complete 227 that i would let go very cheap. came off a 60 and i even have the m&w super snout that went with it. located in se sd. Cheap enough that you could use it for parts or run it. call me at 1-605-770-1807 if you are interested or have questions.



[Log in to Reply]  [No Email]
Craig Lysne

02-26-2006 18:51:06




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
I think it will fit on many John Deeres up until the end of the new generation tractos, if you have the picker and the manual it should have what tractors it will fit on. No major differences in apperance but 237 picker does a beter job cleaning the husks off the cobs. 237 also has longer elevator.



[Log in to Reply]  [No Email]
ndaircapt

02-26-2006 18:30:21




Report to Moderator
 Re: 227 picker differences in reply to Superpicker, 02-26-2006 18:06:05  
These were built before I was born too : )

but I have seen them in actual farm use. My grandpa picked with a 227 and 237 until the late 90's, and then bought a 300 pull type. I used to run one of the 237's once in a while.

I've got two books for 227's, one with a 4010 on the cover and one with a two cyl on the cover. there don't seem to be any major differences and of the 227's ive seen, I don't know of anything major. I wouldn't pass up a 237 if you find one though, because the 237 as Ive been told, picks a little better, and usually had more shielding installed stock and the longer elevator stock.

Ive got a picture in the tractor pictures of my 60 under a 227, (have the tractor now, don't have the picker) taken when I was three. note the elevator extension, we could fill a grvity box with that!

I wish I had the space to have a mounted picker here, but they are a rare duck anyway in ND.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy