Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020 Need leaky injector pump advice

Welcome Guest, Log in or Register
Author 
unlkid

02-21-2006 10:58:21




Report to Moderator

I have a "69 4020 with CBC Roosa Master. I am getting a little fuel leakage coming from where the bottom pump flange mates with the engine block. The bottom pump flange must bolt to the injector body with bolts/screws from the bottom. Can anyone confirn this? Schematic? I am hoping that this might be a case of bolts becomong loose. Any other ideas?




[Log in to Reply]   [No Email]
jdemaris

02-21-2006 11:39:40




Report to Moderator
 Re: 4020 Need leaky injector pump advice in reply to unlkid, 02-21-2006 10:58:21  
The engine-mounting flange seals against the pump body with an o-ring. It's attached by bolts that you can't see until you take the pump off the engine. The bolts use a 3/16" hex (Allen) wrench.
I can send you some scans out of the RoosaMaster manual if needed.



[Log in to Reply]  [No Email]
K.B.-826

02-21-2006 18:22:43




Report to Moderator
 Re: 4020 Need leaky injector pump advice in reply to jdemaris, 02-21-2006 11:39:40  
jdemaris, I've always been curious as to why some 4020's have that pump. Do you know why, and was it just a certain serial number break that had that pump?



[Log in to Reply]  [No Email]
jdemaris

02-22-2006 05:54:05




Report to Moderator
 C/CB/CDC pumps versus DB/JDB pumps in reply to K.B.-826, 02-21-2006 18:22:43  
Who knows? I suspect it was simply based on price and availabilty. Roosamaster made several different model pumps at the time. I suppose Deere would submit a spec. sheet on the requirements of a certain engine, and Roosamaster would come back with several available pumps. The little "C" pumps we used on many Deere models. In some ways, they were better than the more common DB or JDB pumps because they do NOT have a plastic governor ring that often fails in the JDBs, DBs, and some DB2s used in Ford and GM pickup truck diesels in the early 80s. I was told several Roosamaster stories by Deere engineers during the late 70s - I don't know how true they are. Around 1979, Deere regarded the C pumps as obsolete, no longer sold major parts for them, and instead, sold change-over kits to put DB or JDB pumps onto the engines. I installed many - a compete kit with a new pump and lines, etc. was around $900. A Deere engineer told me that Roosamaster - at that time - was owned by two old ladies that had inherited the company. They were very stubborn, and would not allow aftermarket production of replacement parts for their pumps. So, when they discontinued the C series, and no longer made parts for it, nobody else did either. The story may be b*llsh*t, or it may be true. I know of many machines that still have their original C pumps working just fine. My neighbor still uses his 4020 that he bought new in the late 60s, and I've rebuilt the engine three times since he bought it. The C pump on it has never been touched with well over 40,000 engine hours on it. That's equivalent to over a million miles on a car or pickup truck. I also saw many C pumps get removed and thrown in the garbage even though there was nothing wrong with them. I saved a few, I wish I'd saved them all. On ag. stuff, Deere used them on the 820, 920, 1020, 1520, 2020, 2120, 2510, 2520, 3010, 3020, 4010, 4020, several combines, cotton pickers, and power units. On industrial stuff, they were used on the 300, 350 crawler, 400, 440 skidder, 450 crawler, 480 forklift, 500, 540 skidder, 544 loader, 570, 600, 644, and the 690.

[Log in to Reply]  [No Email]
unlkid

02-21-2006 12:57:23




Report to Moderator
 Re: 4020 Need leaky injector pump advice in reply to jdemaris, 02-21-2006 11:39:40  
Thanks for the response. I am getting leakage between the pump mounting flange and the engine block. Could these bolts that hold the pump mounting flange to the pump housing be loose and causing the leak? Can just the o-ring be replaced without leading to a lot of disassembly?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy