Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

2010 Diesel

Welcome Guest, Log in or Register
Author 
Greg Wight

02-19-2006 14:18:34




Report to Moderator

I recently purchased a 2010 diesel that the motor is torn apart, aparantly due to water in the cylinders. Was wondering if the tractor is worth fixing or selling it has a factory weight set on the front and the power adjust rear wheels it only shows 2300 hrs. If i sell it what would it be worth. Thanks for any info.




[Log in to Reply]   [No Email]
Deere-tom

02-20-2006 11:02:08




Report to Moderator
 Re: 2010 Diesel in reply to Greg Wight, 02-19-2006 14:18:34  
I agree with F-I-T. "Butcher" Is a little strong. Just keep in mind much better to part out one of any thing, than have one that some one need go for scrap!!



[Log in to Reply]  [No Email]
zwr

02-19-2006 14:56:18




Report to Moderator
 Re: 2010 Diesel in reply to Greg Wight, 02-19-2006 14:18:34  
The 2010D has a reputation for poor quality, especially the engine. Coolant in the oil is common. It's what happened to mine. I got rid of it before it fell completely apart.



[Log in to Reply]  [No Email]
Joe Stewart

02-19-2006 15:22:58




Report to Moderator
 Re: 2010 Diesel in reply to zwr, 02-19-2006 14:56:18  
When I bought my 2010 diesel back in 1998, it was in a condition similar to yours. I chose to recondition the engine, and I now use the tractor on a regular basis, however, knowing what I know today, I would not choose that route again, primarily due to cost. I could own a nice 2020 or 3010 for the amount of money I sunk into the 2010. Part out your machine. Sell individual parts on the online auctions. I saw a guy do this with a 2010 diesel about a year ago and he appeared to do quite well. Joe Stewart

[Log in to Reply]  [No Email]
Greg Wight

02-20-2006 15:14:44




Report to Moderator
 Re: 2010 Diesel in reply to Joe Stewart, 02-19-2006 15:22:58  
I never said I was parting out for sure. It does seem hard to find engine parts for the diesel. I have bought alot of tractors on deaths door. Maybe you have some ideas. If you want a 2010 that much make me a reasonable offer. I don"t think MI is to far from ND. Thanks, Butcher



[Log in to Reply]  [No Email]
Bob

02-19-2006 18:52:07




Report to Moderator
 Tractor Butcher Rant in reply to Joe Stewart, 02-19-2006 15:22:58  
I think it would be regrettable to part the little fellow out so quickly!

There are only so many of them around, and getting fewer. I suspect they will soon have some collectable value.

Oh, and did I mention I think people who part out more or less complete tractors without trying first to sell them whole to someone who would repair them are BUTCHERS!

I have no idea where he is located, but if the tractor would happen to be close to me (ND), I would try to buy it!

[Log in to Reply]  [No Email]
F-I-T

02-19-2006 20:06:15




Report to Moderator
 Re: Tractor Butcher Rant in reply to Bob, 02-19-2006 18:52:07  
Ya know Bob, it's that guy's tractor. My 70 Diesel is alive today because of some 6 different donor tractors. Without them, there would have been 7 dead 70D's.

Besides, when he makes one less 2010 D, yours will be worth just that much more.

Dang! That's why they call it personal property.

Frank



[Log in to Reply]  [No Email]
Bob

02-19-2006 22:04:33




Report to Moderator
 Re: Tractor Butcher Rant in reply to F-I-T, 02-19-2006 20:06:15  
F-I-T,

The problem is, I DON'T have a 2010, and would like to own one!

They are not very common up here, and I HATE to see a more or less complete one junked out!



[Log in to Reply]  [No Email]
F-I-T

02-20-2006 04:57:36




Report to Moderator
 Re: Tractor Butcher Rant in reply to Bob, 02-19-2006 22:04:33  
Well, there are 21 for sale on at t/r/a/c/t/o/r/h-o-u-s-e-dot-c-o-m in the following states: PA,OK,IL,KS,IN,MO,TX,MN,KY,SD,MI,IA,WI,TN,AR.

You didn't say where you lived, but this is just one site. Looks to me like you just need to let your checkbook do the talkin'. Once you own one YOU might be grateful you had access to some salvage parts for it, such as parts off of this one.

Butcher? That's a tough word. Awfully judgemental.

[Log in to Reply]  [No Email]
jdemaris

02-19-2006 18:51:18




Report to Moderator
 Re: 2010 Diesel in reply to Joe Stewart, 02-19-2006 15:22:58  
Unfortunately what you say is true for many tractors - good and bad. I've got a place near to me that buys good running tractors and parts them out. A 2010 engine, diesel or gas can give a lot of good service if fixed and taken care of properly. But the rest of the tractor will still be a 2010. Deere had the water-in-oil problem with many engines, not just the 1010s and 2010s. In regard to parting machines out - I wish I had done that with my Allis Chalmers HD4. I bought it running but just barely. I've got $7000 in it so far and counting, just in the initial cost and parts. I just recently saw a parts machine on Ebay with a blown engine and it went for $5200. Maybe I should of sold mine on Ebay and found a complete running machine in better shape. Now, I figure there is no good way out other than finishing it.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy