Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

530 carb overpriced parts-mother deere

Welcome Guest, Log in or Register
Author 
Dave NE IA

02-11-2006 11:58:03




Report to Moderator

Had a 530 carb, so told the guy what i needed, gasket set,needle valve,& throttle shaft. That was the way he ordered it from mom deere. Parts man must of had his head up his butt. Parts man ordered seperatly instead of complete kit. Exactly $99.00 plus change. (probably my fault for not detailing the conversation) I was told it was ok, but has made me wonder if I should have had the guy take them back and remove /replace the parts mans head with the carb parts. Still ticks me off when I think about it. Dave NE IA

[Log in to Reply]   [No Email]
G/MAN

02-13-2006 07:32:31




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-11-2006 11:58:03  
So this is yet another case where somebody willingly paid for the parts, and is now second-guessing themselves and complaining about the price???



[Log in to Reply]  [No Email]
Dave NE IA

02-13-2006 16:27:37




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to G/MAN, 02-13-2006 07:32:31  
G/man, you are kind of correct except he had no idea if they would have charged him ten times that. I'm the one with a problem over the price as it seems way over priced. The guy would never complain regardless. Yes, it is indeed totaly my fault for not checking first, just had no idea it it would be double Roberts price. Preveously I had told the guy that thirty five is the most I have ever charged for a kit, bead blasting, and removing all plugs, screws and painting. I can't help but think the guy thinks I got a cut from Deere dealer. The guy got by cheap no doubt as the Deere dealership just drops the carb in some cleaner and removes the easy things twists off as many screws as possible and charges a extra $150.00 for labor. And you can't believe the guys that don't expect it to run 100% because the carb is pretty old. As usual I had to go off again--sorry for burning your ear. Dave NE IA

[Log in to Reply]  [No Email]
DickD

02-14-2006 23:17:46




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-13-2006 16:27:37  
There is no need to apologize for thinking you paid too much. I'm sure you realize Deere has to charge more due to their tremendous overhead. And it it definitely nice to call for something, hard to find, and have it the next day, but the only way you find out what others are paying is to do exactly what you did, and post your problem. I called Deere recently, and was talking to the parts man. He informed me that they had valves for my 1938 G!! Think about that. The price for 4 valves was $600, and as I am on social security, I will look around before I pay that amount. You did get several good posts on price so you can make your own choice next time. This discussion board is super. None of us is as smart as all of us.

[Log in to Reply]  [No Email]
CRUSADER

02-12-2006 06:14:57




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-11-2006 11:58:03  
I priced a kit for a 630 at a John Deere Dealership last spring/summer. They wanted $124.00 plus tax. I managed to get a kit from a TISCO Parts Dealer for less than $30.00 and that included shipping. You may want to look around. I also have learned that it costs nothing to call around to find the better price for parts/equipment.

Jim



[Log in to Reply]  [No Email]
Dave NE IA

02-12-2006 09:03:11




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to CRUSADER, 02-12-2006 06:14:57  
Jim, I'm not sure but I would take a good guess that Roberts throttle shafts are indeed Tisco. I do have a educated guess that Burry gets his gaskets from Roberts / Burry sells brass sets to Roberts. This is not fact, just pretty good odds. Both are real nice guys and good to do business with. I just try to keep it cheap for us red neck limited budget dudes. I'm kinda old and have a heck of a time paying twice as much for a carb kit as I paid for alot of the tractors, definatly a sign of old age. Dave NE IA

[Log in to Reply]  [No Email]
Glen in TX

02-12-2006 09:48:21




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-12-2006 09:03:11  
Dave, I had trouble last year with throttle shaft and butterfly from JD dealer for a early B carb. High price too and then they didn't fit and a rediculous restock fee to get right ones and weren't sure they could get right ones as they were convinced I was a idiot and couldn't fit the parts in carb. So, I walked back out with parts that didn't fit and ordered from Roberts and they fit perfect for much less but that made me sour on anymore JD carb parts too especially from that dealer. They recently went through a ownership change too. Wonder why?

[Log in to Reply]  [No Email]
Machinery-man

02-11-2006 16:44:19




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-11-2006 11:58:03  
Why don"t you save yourself a lot of stress and sign up for JD parts online and you can price all items before you make a decision. It"s at the JD site, and is free....they don"t have the parts manual on the 2 cylinder but you can plug in your part # and get a price....remember, this is a hobby....



[Log in to Reply]  [No Email]
Dave NE IA

02-11-2006 17:40:56




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Machinery-man, 02-11-2006 16:44:19  
I for the most part use the Tisco kits and so far hitting 100%. I have also used the JD kits and never got close to that price. Roberts kits don't get even close, I think $45.00 plus freight. I have never charged labor, so I have most of them get the kits just in case they run out of funds. I just charge a little for paint or used parts, and I can handle the loss if I don't get paid. Dave NE IA



[Log in to Reply]  [No Email]
Mike M

02-11-2006 12:52:42




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Dave NE IA, 02-11-2006 11:58:03  
I think that's the only way Deere sells those. Last throttle shafts I bought were really high as were the needle and seats gaskets were good price though. I have used plenty of aftermarket kits on those. The parts are cheap and made cheap also. I'm not sure it really saves much money as the extra time wasted getting the aftermarket throttle shafts to work right may offset this. The aftermarket won't last as long for a working tractor either as they are plated brass and the Deere are steel.

[Log in to Reply]  [No Email]
Dave NE IA

02-12-2006 13:29:18




Report to Moderator
 Re: 530 carb overpriced parts-mother deere in reply to Mike M, 02-11-2006 12:52:42  
Mike, perhaps I find bad luck, but I have always had to ream the bushings so they don't bind even from mom Deere. I sure like Roberts gasket sets over Deer, but just my opinion. Tisco got a big time bug up there butt and you have to do x amount of business in order to get wholesale prices. The repair shop I always got my kits from (never over $12.00 on any complete kit any tractor) is a fading shop due to our economy and nothing but big equipment for the big farms. Out of their small shops league. The hobby farmers are suffering from high fuel / gas / can't get decent prices for livestock as you need big volume to get your foot in the door---well you know the story on that. Our small town is falling by the way side. TSC has carb kits, but they pretty much stock Ford, They are one the least popular in our area, and the manager agrees, but the big guys that own the chain of stores must have a few Fords. Dave NE IA

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy