Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Draw bar support for M

Welcome Guest, Log in or Register
Author 
Greg A

02-08-2006 05:20:51




Report to Moderator

Wanting to put a 3-point on my M, I have been looking at different aftermarket systems then I came across at johnnypopper.com a 3-point conversion that Ron Rumberger placed on his M that utilized a drawbar support from what he thought was a 420, has anyone else used this drawbar support on their M and how hard is the support to find, it looks like it may be possible to make this support in the shop but I don't know if it would require more than mild steel for adequate strength.

[Log in to Reply]   [No Email]
Greg A

02-09-2006 04:54:36




Report to Moderator
 Re: Draw bar support for M in reply to Greg A, 02-08-2006 05:20:51  
Steve, I am unable to open your picture.



[Log in to Reply]  [No Email]
Steve Crum

02-08-2006 09:00:31




Report to Moderator
 Re: Draw bar support for M in reply to Greg A, 02-08-2006 05:20:51  
third party image

I don't know how tough you are about originality, but I put a 3 pt. together for my M from off the rack pieces from the local TSC store, and a couple fabrications out of the old scrap hopper. About a hundred bucks invested. You'll notice my M is another tool in the box.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy