Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Deere 2950 or 2955 specs?

Welcome Guest, Log in or Register
Author 
Hugh MacKay

02-07-2006 03:15:42




Report to Moderator

I know these two tractors are 6 cylinder, but my question is which Deere engine is in these?

I am quite familiar with the older 8 speed power shifts having owned owe some years ago. I am also familiar with the 8 and 4 plus hi-lo being used in that same era.

I see a 2950 for sale quite near me, and they are calling it partial power shift. I am assuming this tractor has 3-4 standard shift ranges plus 3-4 power shifts. Could someone enlightn me as to the exact gear sequence on these, and can you use them much like the old power shift going from forward to reverse on shuttle work. Thankyou.

[Log in to Reply]   [No Email]
R. John Johnson

02-07-2006 06:06:02




Report to Moderator
 Re: Deere 2950 or 2955 specs? in reply to Hugh MacKay, 02-07-2006 03:15:42  
Hugh

We have a 2755 which is being used to feed cows in Manitoba's winters. The 2755 has a 4 cylinder engine with the same bore and stroke as the 2955's 6 cylinder engine. Most everything else is identical or scaled up on a 2955. The transmittion has 4 gears that are synchronized, a high/low/reverse shift that is not synchronized. The power shift you are refering to was a hydraulically actuated planetary that gave you a gear halfway between the one you are in and the next lowest gear. I don't think they had a reverser. I've looked over a 2955 shop manual and don't remember seeing one. The clutch is a dry clutch. I could be wrong on this, but I think the 50 series clutch is mechanically actuated. I know the 55 series has a hydraulic clutch set up where the release bearing is also the slave cylinder. When replacing the clutch, every mechanic I have spoke to says do not rebuild the slave cylinder, but to replace the entire unit.

The SGB is very quiet and comfortable. MFWD is available. a 265 loader is a good loader to match.

One last thing to consider. If this is going to be used for a lot of heavy tillage then a Waterloo built tractor would better suit the bill. The 2955 was a Manaheim built tractor and in my opinion, is a very large utility tractor and is built as such. For similar money you could get a 4440 or such and have a heavier built tractor with a wet clutch.

My two cents

John

[Log in to Reply]  [No Email]
jd2355

02-07-2006 04:56:01




Report to Moderator
 Re: Deere 2950 or 2955 specs? in reply to Hugh MacKay, 02-07-2006 03:15:42  
I don"t think they were available with the type of power shift you are talking about. The one that I ran,had 1 stick for 1-4 syncronized gears, and one stick for hi, lo, and reverse. It also had a hi-lo lever(I think this was hydraulicly operated)I beleive there was a hydraulic forward, and reverse shuttle available as a option.



[Log in to Reply]  [No Email]
Hugh MacKay

02-07-2006 05:29:41




Report to Moderator
 Re: Deere 2950 or 2955 specs? in reply to jd2355, 02-07-2006 04:56:01  
jd2355: I thought this add for the 2950 looked rather strange. I know there are partial power shifts in the larger Deere's even the big articulateds.

In the early days of the 8 speed power shift it was quite common to see it in tractors as small as 3020, yes I've even seen the ocasional 2520 with power shift. Later on it was rare to see power shift in anything other than 100+ hp tractors. I expect cost was the big factor. Then Deere went to the 15 or 16 speed power shift. I expect partial power shift is more aconomical, both to build and maintain.

I had expected I might find a 2950 or 55 with complete 8 speed power shift, but this add calling it a partial power shift surprised me. I have no problem with the complete 8 speed power shift, the one I had went 13,000 hours trouble free. Technically 4 power shifts should be sufficient for most farm work, as long as one can go from forward to reverse, same as the old 8 speed. That is precisely what I'm trying to find out.

I could call the dealer, it's not even long distance. I just don't need a salesman bugging me. I've made a practice all my life of knowing more, about the product, than the salesman does, before talking with him. I want what I want, not what he thinks I need. Years ago these guys listened to your needs, not anymore with these college educated salesmen.

[Log in to Reply]  [No Email]
cannonball

02-07-2006 03:29:50




Report to Moderator
 Re: Deere 2950 or 2955 specs? in reply to Hugh MacKay, 02-07-2006 03:15:42  
the 2950-55 uses the 359 cu in engine...if they both have cabs the 2950 is about 1200 lbs heavier than 55..farm equipment guide list them as 8 speeds or 16 with hi lo...dry clutches...don't know if this helps have nice day may god bless



[Log in to Reply]  [No Email]
4010 puller

02-07-2006 13:19:29




Report to Moderator
 Re: Deere 2950 or 2955 specs? in reply to cannonball, 02-07-2006 03:29:50  
I know what you are referring to. I know of three that have them right off hand here near me. Two 2950"s and a 3155. You have your two shifters between your legs (R,L,H and 1,2,3,4). Then up on the dash opposite the hand throttle they have another handle just exactly just like the throttle. I believe it acts like a oliver hydra-power or a farmall torque amplifier, you can shift it on the go while on the move. I haven"t been able to find this feature shown in any of my john deere books but know they exist.

Hope this helps.

John

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy