Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

40T loader

Welcome Guest, Log in or Register
Author 
Pete in NY

02-03-2006 06:23:11




Report to Moderator

Does anyone know the model number of a the JD loader that came with my 40T I bought last year. The 40T has the adjustable wide front end.
I can't find any idenfitication on the loader frame. thanks.




[Log in to Reply]   [No Email]
Quebec Red

02-05-2006 15:05:31




Report to Moderator
 Re: 40T loader in reply to Pete in NY, 02-03-2006 06:23:11  
It could be a model 30. JD had a 30 and a 50 loader in the early 50s. My Father had a 30 on a JD420W. The loader lifted by retracting the pistons into the cylinders, verus the common practice of pushing out the ram. Also had to remove the left head light to install the loader as the tractor was built off centre. Rather a useless piece of engineering (load er). The loader was awkward, slow, weak, heavy, and a pain to mount/dismount, even when you left the axle mounts in place. The neighbour bought a Farmall 230 with the IH loader the same week as my Fathers purchase of the 420. Often we would trade tractors if we needed a loader. As time went on,my Father purchased a Farmall Super H with a IH 33 loader. The 420 loader usually only was used for snow at another farm after that. Saved driving 4 miles in open country with no heat houser, etc. That little Farmall loader was 3 times the unit that the 420 loader was. But over 12 years, few welds were made to the JD, possibly due to its limited usage. Must have been one of John Deere's many--if we build it, then they will buy it deals. No respecting engineer designed that series loader who had an appreciation for his design and ideas and how the dam$ thing was supposed to work. That JD loader did more advertising for the competition than a high dollar ad agency could ever think of!!!!! !!!!! Ya, big time....QR....

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy