Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

D vs B Tractor Traction

Welcome Guest, Log in or Register
Author 
Skyhawk Greg

01-30-2006 12:00:55




Report to Moderator

Here in Ohio it is rather warm for the season. As such, it is pretty muddy and sloppy in many areas. Over the weekend, a friend got their four wheel drive pickup truck, loaded with firewood, stuck out in the woods. I had four choices of tractors with which to pull them out, and chose the B. The B has good tires, and it has both right and left brake controls. When the slack came out of the chain, that was between the B and the pickup truck, the right tire of the B started ever so slightly to slip in the mud. Before tearing the sod to any degree, I applied the right brake to transfer the power to the left wheel. This process was used alternately from wheel to wheel at various stages of the truck removal until everything was out of the woods. No problems. Couldn't ask for better! Now the question - Had I used a D for this task, there are several possible outcomes. One is that the D weighs enough that the primary drive wheel would not have slipped at all. Another is that the primary drive wheel would have slipped, and since there are no brakes, both the truck, and the tractor would have been stuck. What happens when one rear wheel of a D breaks loose? Does power transfer to the other wheel on its own? If you have to go into reverse to get out of the hole, does the same tire do the work? Or is it the other wheel since it is in the other direction? These are probably simple questions, but I have no experience with the D in this type of situation, and would prefer to not get it stuck out in the woods. Thank you. Greg

[Log in to Reply]   [No Email]
Skyhawk Greg

01-31-2006 07:27:11




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
Thanks for all the responses! This is a recap of what I think you have said:

GIVENS

* Equal footprint weight for each tractor at the rear wheels (add weights where needed)

* Identical tire width, height, tread, and condition

* The assumption that the required torque does not exceed what is available from either tractor

* Conditions being identical, and such that one drive wheel will definitely slip


CONCLUSION:

With a skilled operator, the B will outpull the D simply because of the ability to use differential braking and transfer the torque to the non-slipping wheel.


As a side note, it sounds like when a D is stuck, that it is REALLY stuck!

BTW - I am not trying to berate a D in any way. My D is my favorite tractor.

[Log in to Reply]  [No Email]
41JDb

01-30-2006 19:01:14




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
what shows do you attend in Mi? Im new at restoring and am from Mi and havent heard of any big shows outside of Oh and Ill.



[Log in to Reply]  [No Email]
Mark Scholten

01-31-2006 16:44:44




Report to Moderator
 Re: D vs B Tractor Traction in reply to 41JDb, 01-30-2006 19:01:14  
We go to 17 to 18 shows every year. That number includes Portland, Ind, Mt Pleasant, Ia, Wauseon, Oh and LaGrange, In.
The bigger shows that I enjoy include Mason, South Haven, West Branch, Buckley is a big show but not one of my favorites, Oakley is big but I have never been to that one, Walloon Lake. The smaller shows I go to are Scottvile, Clio, Allendale, Charelton Park, Hickory Corners. That is a few and all well worth the day. Mark

[Log in to Reply]  [No Email]
Brendon

01-30-2006 16:16:43




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
Even when one wheel is spinning and the other isn't, the torque on each axle shaft is always the same (assuming a non-locking, non-positraction type differential). If it takes, say, 1000 lb-ft of axle torque to spin one wheel, the other axle shaft is also getting 1000 lb-ft as well, even if the wheel is not rotating. If the traction at both wheels is the same, both wheels will often spin together even with an open differential.

As to your question, it is likely that taller tires in good condition do better in mud than short, worn-out tires. And although this sounds strange to say, the B may not be outweighed much by a D. According to the Nebraska test reports, the D weighed anywhere from 4260 (first model tested in '24) to 6060 pounds (last model tested in '40). The B started out at 2760 lbs but was up to 4400 by the end of its run. (All weights are for a bare tractor with no ballast.) So, the last B was actually heavier (and had more drawbar pounds pull and horsepower) than the first D.

[Log in to Reply]  [No Email]
Glen in TX

01-30-2006 20:36:08




Report to Moderator
 Re: D vs B Tractor Traction in reply to Brendon, 01-30-2006 16:16:43  
A early D will outpull a B or A anytime if in good running shape. I've done it lol. What was the D made for ?? p^$$yfoot cultivating? NO... Drawbar pulling! YEP

[Log in to Reply]  [No Email]
Brendon

01-31-2006 03:24:11




Report to Moderator
 Re: D vs B Tractor Traction in reply to Glen in TX, 01-30-2006 20:36:08  
Don't shoot the messenger! I was surprised at these figures too but they came right off the official test reports.



[Log in to Reply]  [No Email]
Glen in TX

01-31-2006 10:58:36




Report to Moderator
 Re: D vs B Tractor Traction in reply to Brendon, 01-31-2006 03:24:11  
I know where you got the figures and just prodding you some lol, but sit in the seat of a D for yourself and find out what they can do ? The D was made for lugging a drawbar pull all day long and when you pull one on a track you usually got the engine lugged way down before a wheel slips if the diffential isn't worn out. The 28 D I took to the tractor pull got outlawed from the next pull and they said no more steel wheels because I beat out JD A s & B s driving through their holes but a IHC M souped up with MTA engine beat me? lol. It was a weight class. We changed the 28 D to later 6 3/4" bore pistons and shaved the block some and used a later DLTX-63 carb also. It had no PTO so I don't know what it put out but more than 27 HP I'm sure. Styled Ds and 31-38 Ds with the later engine can be modified by not doing much for 50 to 60 HP also. Anything is going to slip in mud but till you sit on the seat of it and try it books tell you nothing.

[Log in to Reply]  [No Email]
CMB

01-30-2006 16:05:03




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
When I bought a new pickup a few yrs ago, I opted for a two wheel drive, the idea being that anything for which I needed a 4wd , I could do better with most any of the tractors I own. I got a lot of "static" from friends about this, but one of my friends offered the opinion that "All a 4wd will do is get you much farther INTO the woods before you get stuck!" Guess that's one way of looking at it, & in about 60000 miles I can count on one hand the times a 4wd would have been any help-the rest of the time it's a detriment.

[Log in to Reply]  [No Email]
CMB

01-30-2006 16:12:42




Report to Moderator
 Re: D vs B Tractor Traction in reply to CMB, 01-30-2006 16:05:03  
Sorry about the "off topic" post but was just reminded of that story. By the way, I believe the D would outpull the B by a wide margin, but if it DID spinout you'd be in trouble!



[Log in to Reply]  [No Email]
jas

01-30-2006 14:30:34




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
The D would have done the same as the B. Power will go to the wheel with the least traction. No matter foreward or reverse.



[Log in to Reply]  [No Email]
RAH

01-30-2006 13:28:16




Report to Moderator
 Re: D vs B Tractor Traction in reply to Skyhawk Greg, 01-30-2006 12:00:55  
Nothing to do but load the wood back in the pickup, head to the woods, get stuck again and this time go and get the D. BTW - 2 "Demerits" to the neighbor for getting stuck in the first place.



[Log in to Reply]  [No Email]
Mark Scholten

01-30-2006 17:58:38




Report to Moderator
 Re: D vs B Tractor Traction in reply to RAH, 01-30-2006 13:28:16  
Last year at one of the shows here in Michigan, we had a lot of rain on Saturday night. It rained all day Sunday. When my other friends were ready to leave, we couldn't get out of the field we parked in. Now I have a single axle semi tractor with a 48 foot drop deck trailer. Weighs about 30,000#. One of the guys has a single axle sleeper with a 40 foot toy box, weight unknown and the other has a 3/4 Chevy Dura Max with a 32 5th wheel toy box again weight unknown. None of us could move. Clay hay field all uphill. I went and got my '47 D and pulled the pickup and 5th wheel out 1st. No problem. Then I got the other semi with his toy box out, again no problem. Then my buddy with the Dura Max got on my D and pulled me out. No problem. People were taking pictures and videos and we were the talk of all the shows the rest of the year.
I am reasonably certain, a B would not have done the job. And we are not going to go back and get stuck again this year to test the theory. Mark

[Log in to Reply]  [No Email]
Glen in TX

01-31-2006 12:54:55




Report to Moderator
 Re: D vs B Tractor Traction in reply to Mark Scholten, 01-30-2006 17:58:38  
I can believe a D would pull those out. lol. We use to drag a 6030 around to pull start with our Ds to put a load on to get carburetors set.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy