Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Deere 3 cylinder diesel 3179 or 3029

Welcome Guest, Log in or Register
Author 
Dirtjockey

12-06-2005 09:53:24




Report to Moderator

Was this engine ever built in the great U S of A?




[Log in to Reply]   [No Email]
jdemaris

12-06-2005 17:56:03




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to Dirtjockey, 12-06-2005 09:53:24  
I don't know how to tell where anything is made anymore. The 3179, 3164, and 3152 are all in the same family and use the same bolt pattern. Most 152s were US built but some came from Germany and were used in 350 crawlers, 820, 830, 1020 Ag. and 300 Ind. tractors, etc. Some 350Cs had French engines. Now, Deere uses the 179s as replacement engines in the 350s and I've seen some with Waterloo tags on them in the 49 to 79 horsepower ratings - but that just might mean they were tested in Iowa and came from overseas?

[Log in to Reply]  [No Email]
Dirtjockey

12-07-2005 15:44:44




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to jdemaris, 12-06-2005 17:56:03  
Thanks for the info. I am looking for any diesel engine of this weight to install in a off road jeep. I am looking at a Deere 2.9 turbo. Nice torque output. Good power in a short length. ulta light weight body. it's only in thought now. we'll see, just not that fond of the saran engines



[Log in to Reply]  [No Email]
jdemaris

12-08-2005 05:58:45




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to Dirtjockey, 12-07-2005 15:44:44  
I haven't kept up with any variations Deere might have now for the 179 cube engine. Any of the ones that I've seen appear to be overly heavy for use in a Jeep. I know Deere was making lighter versions and thinner block castings for non-tractor use - but I don't know about the 179 c.i./2.9 litre. I've read several articles about diesel powered Jeeps in this county and overseas. Jeep Wranglers with the 2.8 turbo-diesel in Europe seems to be popular - and I guess the same engine is what is now offered in the US in the Jeep Liberty. I've always been interested in small diesel powered vehicles. Back in the late 70s, I installed a Nissan turbo-diesel in a Chevy 1/2 ton truck. At the time, complete bolt-in kits were for sale. Same with four-wheel drive kits for mini-pickups before there were any available factory-made. When Chevy started selling the diesel 4WD mini-pickup LUVs, I thought they really had something. But - they were little crap-wagons that rusted out in five years. I still have, though, a similar powered vehicle (1981 Chevette diesel) and Deere used the same basic Isuzu engine in some of thier skid-steers. I also had an Isuzu Trooper 4WD with a turbo-diesel. That was a very good vehicle mechanically, but rusted out very fast here in the salt-belt. The Isuzu cab-over trucks I see now with small turbo-diesels seem to be very rugged and fuel-efficient. Now, with the newer diesels made for automotive use - I've lost interest since they've gotten overly complicated with comon-rail injections, microprocessor controls, and complex exhaust emission systems. I've seen that many of the newer European diesels now being offered in this country can not be run on off-road diesel unless it is low-sulfur.

[Log in to Reply]  [No Email]
Dirtjockey

12-08-2005 19:25:07




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to jdemaris, 12-08-2005 05:58:45  
Actually the 3 cylinder 179 is not too heavy for a wrangler. It will compare to a v-8 on with the weight farther back. How tall the engine is might comes as a problem. Inter cooling the engine will boost power for a minimal increase in weight. Now I have been told that JD makes a 179-2.9 variant that is used in lighter weight applications, but I have found no evidence of that yet. I know of a place that sells cummins 239 4 cylinders out of panel vans as jeep engine replacements. They say you can get really impressive mileage. They then can be street legal I suppose.

[Log in to Reply]  [No Email]
buickanddeere

12-06-2005 14:47:59




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to Dirtjockey, 12-06-2005 09:53:24  
Why? Do you have the serial number info from an engine that may have been US built?



[Log in to Reply]  [No Email]
Dirtjockey

12-07-2005 15:47:34




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to buickanddeere, 12-06-2005 14:47:59  
No, just an off road - off the wall idea.



[Log in to Reply]  [No Email]
TRUCKJERK

12-06-2005 13:57:46




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to Dirtjockey, 12-06-2005 09:53:24  
ARE THEY YANMARS???



[Log in to Reply]  [No Email]
G/MAN

12-06-2005 10:17:24




Report to Moderator
 Re: Deere 3 cylinder diesel 3179 or 3029 in reply to Dirtjockey, 12-06-2005 09:53:24  
I don't know about the 3179 yet, but the 3029 is apparently built in Saran, France and Torreon, Mexico.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy