Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Difference between 48 and 148 loaders? 48 on 4440?

Welcome Guest, Log in or Register
Author 
mustang maniac

12-04-2005 19:33:34




Report to Moderator

What are the differences between the John Deere 48 and the 148 loaders? I know the bucket on the 48 has one cylinder and the 148 has two. Are there other differences? Is the frame of the 148 heavier? Would the 48 work on a 4440?




[Log in to Reply]   [No Email]
mustang maniac

12-05-2005 20:56:41




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
I saw a 48 on a 4040 last weekend. Maybe I should go with a 148 or else something like a Westendorf TA28, WL42 or Koyker 510?



[Log in to Reply]  [No Email]
tro

12-05-2005 19:24:01




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
I ran a 48 loader on a 3020 split the side out of the rollback cylinder cost almost 700 to fix that was 15 years ago. Have a 148 on 4230 now better setup but we abuse it to much.



[Log in to Reply]  [No Email]
JimKS

12-05-2005 19:10:57




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
I see 148's on 4440's all the time. I'm sure a 158 is better, but lots of folks get by fine with 148's. I don't know about a 48 though- never seen one on a 4440, but I think it would work.



[Log in to Reply]  [No Email]
jdjerry

12-05-2005 18:10:48




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
The 58 and 158 loaders reach out in front of the tractor about 1 more foot.



[Log in to Reply]  [No Email]
barnrat

12-05-2005 15:06:16




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
I have a 58 loader on my 3020 I hated it when it had only 1 cylinder. It had no break out force or whenyou lifted to dump the bucket wouldn't tilt all the way down. I ended up putting 2 cylinders on the bucket and changing the geometry of the bucket so it would work better. A 58 loader would be the minimum I would use on your 4440.



[Log in to Reply]  [No Email]
buickanddeere

12-05-2005 14:26:14




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
Isn't a 4440 too much tractor for a 48 or 148 loader?



[Log in to Reply]  [No Email]
960

12-05-2005 19:04:01




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to buickanddeere, 12-05-2005 14:26:14  
I have a 148 on a 4430 and use it as a loader and not an industrial tractor and it is fine. Granted not everyone has that restraint though.



[Log in to Reply]  [No Email]
John Jenkins

12-04-2005 19:48:51




Report to Moderator
 Re: Difference between 48 and 148 loaders? 48 on 4 in reply to mustang maniac, 12-04-2005 19:33:34  
The 148 has more rollback than the 48. I like the 148.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy