Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020 and 1508 cutter

Welcome Guest, Log in or Register
Author 
Leo Crall

11-23-2005 17:58:20




Report to Moderator

I am looking at a 15 ft, Model 1508, John Deere rotary cutter to pull with a 4020. The cutter is priced at $4800 which seems in line with what I have seen. Is this going to be too big a load for the old girl in heavy cover? I am wanting to mow some CRP ground that hasn't been mowed for 3 years.




[Log in to Reply]   [No Email]
John Jenkins

11-28-2005 14:07:12




Report to Moderator
 Re: 4020 and 1508 cutter in reply to Leo Crall, 11-23-2005 17:58:20  
For years we pulled our 15ft Rhino with a 4020 and it did fine. We switched in the early 80�s to pulling it with our 4430 and 4440. The wet clutches in these tractors can take the punishment much better than the old dry clutches in the 4020.



[Log in to Reply]  [No Email]
formula 409

11-23-2005 23:12:24




Report to Moderator
 Re: 4020 and 1508 cutter in reply to Leo Crall, 11-23-2005 17:58:20  
Depends on how fast you want to go mow and how low you want to cut.I would say it will do the job in pretty good fashion.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy