Hey guys, I need some help. Here's my problem....I recently bought a 63 3010 gas, claim is to have been completely overhauled. Looks good new rubber/paint and so on...Well when I looked at the tractor at the dealer it ran ok, little rought but the claim was that it had been sitting for along time and the gas was probably bad, it did have that varnished smell. I hauled her home 220 miles, unloaded and with in 10 minuets it was spitin and sputterin, popin and cracken. Next day I drained the gas, put 10 gallons in with Seafoam from NAPA. No luck, still ran bad. Well after fouling out the plugs and instaling new ones, pulling the carb, cleaning it, checking the float and seat, reinstalling. The tractor ran good for about 10 minuets, then back to poorly. So now I've pulled the carb, in the process of rebuilding, some paint has came off and I find the inlet were the line screws in has been cracked and been brazed. I finished rebuilding, now she leaks were it's been brazed and still runs poorly. First, any one have a Zeinth carb? Second how should I approach the dealer? Thanks for any advice and help guys.....Brian
|