Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

John Deere B starter rod adjustment.

Welcome Guest, Log in or Register
Author 
HoboBob

10-28-2005 13:11:24




Report to Moderator

My dad"s 49 B has a starter rod problem. The starter rod will connect the starter a nd flywheel ok, but does not push the button all the way in. It only needs to go in about 1/8 of an inch. We would really like the info on how to adjust it by the morning, Saterday before halloween, becouse we are going to our other property to pull some logs. We can start it by pushing the button to engage the starter and then reach down and push the button with a screwdriver and it will start. Thanks for the info ahead of time. HoboBob

[Log in to Reply]   [No Email]
Mike M

10-28-2005 17:29:49




Report to Moderator
 Re: John Deere B starter rod adjustment. in reply to HoboBob, 10-28-2005 13:11:24  
To do it safely unhook the battery so it won't move when playing with it. That rod is adjustable. I had one on a 50 one time that the rod was as long as it needed to push but the lever would bottom out in the hole in the case. It still didn't move the button enough so I slipped the end of a cresent wrench over the end of the lever that pushes the button and bent it up some then it pushed it enough.

[Log in to Reply]  [No Email]
JGC

10-28-2005 15:58:32




Report to Moderator
 Re: John Deere B starter rod adjustment. in reply to HoboBob, 10-28-2005 13:11:24  
I helped a friend fix a similar problem. The tin cover was dented in underneath and a lot of dirt had accumulated inside the cover beneath the yoke. The rod & yoke was worn at each joint. I cleaned out the tin, removed the dents, and tightened each connection.

Good Luck,
Jon



[Log in to Reply]  [No Email]
HoboBob

10-28-2005 16:45:09




Report to Moderator
 Re: John Deere B starter rod adjustment. in reply to JGC, 10-28-2005 15:58:32  
Thanks! We would also like some info on pulling logs. Like tips and how to do it safely. HoboBob



[Log in to Reply]  [No Email]
DRL

10-28-2005 18:22:15




Report to Moderator
 BE CAREFUL in reply to HoboBob, 10-28-2005 16:45:09  
If you haven't pulled logs before, take it slow and easy! First off, hook to the tractor ONLY at the draw bar or drawbar support, not on the axle housing, not anywhere above the drawbar. Excellent way to flip the tractor on top of you. Secondly, you need to skid the log so that the butt end is up off the ground. If it drags into the ground, it will not only pull harder, but can catch on a rock, stump, root, etc, and flip the log end for end on top of you. To accomplish this, you have to adjust the length of the chain and where it is placed on the log. Again, not by attaching the chain at a higher point on the tractor. Thirdly, if you are on a hill, you need to be especially careful that you don't get sidewase and turn the tractor over on it's side. Skidding logs can be done easily and safely if proper attention is given, but can become very dangerous if you let your guard down even for a moment.

[Log in to Reply]  [No Email]
HoboBob

10-28-2005 19:02:15




Report to Moderator
 Re: BE CAREFUL in reply to DRL, 10-28-2005 18:22:15  
Thanks for the warning.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy