Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3155 OK tractor for a round baler and moving snow?

Welcome Guest, Log in or Register
Author 
Reid Graham

10-24-2005 16:25:15




Report to Moderator

The local JD dealer has a '91 3155 for sale. Has a brand new clutch (0 Miles) motor has 2000 hrs on it, and entire trans/rear with about 3000 hrs on it. Brand new front universals & tie rod ends.

Are these fairly reliable machines? We plan on using it this year for feeding a couple of horses round bales, and for moving snow. It also has a 265 loader/grapple on it.


Thanks for any info.

[Log in to Reply]   [No Email]
Jason(ma)

10-25-2005 15:15:14




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
We have one with about 2300 hrs on it. In my opinion they are a problem machine, not one of deere's better machines. The clutch is a MAJOR weak point. Ours is a late model with the last of the clutch updates, still a problem. The reason it doesn't have many hours on it is if we use it the clutch will fail and that is with gental use. I won't let the crew use it. The hand break is also a problem area that needs to be monitored. I like the USA built machines, such as the 4050, 4250 ect.. with the 15sp powershift. Anyone can work those machines safely without breaking them. Yes my comparison is a little off with the 4050's being a little bigger but they are close.

[Log in to Reply]  [No Email]
JD 5020 guy

10-25-2005 09:00:50




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
We had a 3255 with a 265 loader for years. Ran it up to 3,000 hrs and didn't have 1 minutes downtime.



[Log in to Reply]  [No Email]
buickanddeere

10-24-2005 20:47:22




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
A dry clutch is fine for loader work if the operator idn"t horseing around. Or using the clutch pedal like the tractor was hydrostatic. Some people won"t gear down and they just slip the clutch for extended periods of time. The 55 Mannheim tractors are superior to the 5000,5000 ten,5000 twenty series that tried to replace them.



[Log in to Reply]  [No Email]
Reid Graham

10-25-2005 06:54:02




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to buickanddeere, 10-24-2005 20:47:22  
What is a Mannheim tractor? What years were they made?



[Log in to Reply]  [No Email]
buickanddeere

10-26-2005 01:11:03




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-25-2005 06:54:02  
They are the JD tractors built in Mannheim Germany and the engines were from Saran France. There are 10s of thousands of proud farmers who think their JD 2020 etc was US built. Built from prior to WWII as the "Lance". Then the name Deere was also used beside the name Lance in 1960 or so. The JD only named Mannheims were the 310,510 & 710 starting in 1962 or so.



[Log in to Reply]  [No Email]
matthies

10-24-2005 19:05:36




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
Thats alot of loader for that size if tractor, unless thats the only one that will work with the mfwd. I'd look real close where the wheel pivots on the axle, seen one once where the lower bearing ate the axle housing out. Machine shop was able to fix with a bushing for the race but pricey. chris



[Log in to Reply]  [No Email]
Reid Graham

10-24-2005 20:04:57




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to matthies, 10-24-2005 19:05:36  
third party image

Here is a link to the picture.
http://www.agdealer.com/pictures/62/7036762.jpg



[Log in to Reply]  [No Email]
MSM

10-24-2005 18:49:39




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
From your description it sounds like this tractor has had a real hard life and no maintenance.There is no reason for that tractor to have needed an engine overhaul,and the front end rebuilt in 3000hrs.I think I would look elsewhere. You also might consider a smaller tractor,(2550 or 2750)if all you are doing is moving a few bales and plowing snow,a 3155 is kinda overkill,but it is your sandbox.



[Log in to Reply]  [No Email]
Reid Graham

10-24-2005 19:46:24




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to MSM, 10-24-2005 18:49:39  
The tractor actually has 8600 hours on it, and the dealer just did the front end & clutch when it was traded in.

As for the engine, the previous owner ran it out of oil, thus he had to have the engine rebuilt. As per the service records, they installed a new block, crank, cam, pistons, liner, and one new rod, along with all other internals.

I kind of think it may not have been looked after that well, but it has had all the work done..... ..... ...

[Log in to Reply]  [No Email]
960

10-24-2005 18:36:17




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to Reid Graham, 10-24-2005 16:25:15  
The only weak point to these tractors is the dry clutch. Most on dealers lots will say new clutch because if they did not replace them before sale the tractor would be back shortly with an unhappy customer. If you are not using the tractor every day in a feedlot setting it will be great. For everyday use I would recommend the larger Waterloo built tractors with a wet clutch.



[Log in to Reply]  [No Email]
Reid Graham

10-24-2005 18:48:22




Report to Moderator
 Re: 3155 OK tractor for a round baler and moving s in reply to 960, 10-24-2005 18:36:17  
We do not plan to use it every day, but I am sure I can find other things to do with the tractor next summer around our new farm.

I have read other posts regarding these as weak clutches. I did get a copy of the service order, and they did change the clutch, as it shows the parts used on the service sheet, so I trust they did it.

I guess I may just have to buy the proper jacks to do it myself down the road if it does go out I guess. (I am a mechanic by trade)

Thanks for the reply.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy