Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Aww man! More expenses on my 1955 60

Welcome Guest, Log in or Register
Author 
farmerboy

10-19-2005 19:33:23




Report to Moderator

She ran like a top for me cultivating this past spring and raking this past summer. Maybe she was appreciative I saved her. Dad parked her after she wouldn't start for him about a month ago.

I finally had time this past weekend to work on her. First thing I did was replace some wires that were really, really bad. After I did that, the ammeter and all the lights worked to my great pleasure. However, while I had the dash off, I noticed the switch had electricity arcing around the rivets.

$61 to Deere for a new switch.

I then decided to test the generator. Put the field post to ground with the tractor running and the ammeter stayed at negative charge.

$90 to Worthington for a rebuilt generator.

I then decided to order a water pump rebuild kit. It had been leaking since I found her in a fenceline last winter but I didn't bother with it 'til now.

$150 to Deere for a rebuild kit.

Maybe she got jealous of the 1950 B I picked up recently or all the attention I'm giving the 1949 A I'm trying to get running.

I haven't even touched the sheetmetal or paint.

Does it ever end!?!

:-)

[Log in to Reply]   [No Email]
Jim_bobb

10-20-2005 10:03:53




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to farmerboy, 10-19-2005 19:33:23  
Expensive, but a new or late model tractor of the same capacity is very expensive price wise. I suspect that tractor will be a real work-horse bargain after the 'bugs' are worked out.



[Log in to Reply]  [No Email]
Ben.So.Tex.

10-20-2005 08:30:52




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to farmerboy, 10-19-2005 19:33:23  
It's only money, You won't regret it. The 60 will out last both you and me if taking care of. I can't even think of the $ I have put in my tractors. The gas price make me flinch. My G with the power block, I think it sucks a half gallon on each stroke of the piston. Good Luck Ben



[Log in to Reply]  [No Email]
John in IN

10-20-2005 06:42:00




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to farmerboy, 10-19-2005 19:33:23  
That water pump seems high. I had the pump on my model 50 rebuilt by my local J.D. dealer about two years ago. Total cost including parts was just over $80.



[Log in to Reply]  [No Email]
Dirtjockey

10-20-2005 14:06:13




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to John in IN, 10-20-2005 06:42:00  
The new impeller on my 720 cost $80.00 by itself. $120 to overhaul.



[Log in to Reply]  [No Email]
Mike M

10-20-2005 16:55:51




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to Dirtjockey, 10-20-2005 14:06:13  
The last one I did was a 530. The impeller for that one was real high also,I forget how much. Lately I have been putting them on an old shaft chucking them up in the lathe and refacing them off,wala nice new surface for the seal to wear on. Of course there is a slim chance that an old impeller won't press back on the shaft tight enough. I had this happen once.



[Log in to Reply]  [No Email]
Mike M

10-20-2005 04:42:58




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to farmerboy, 10-19-2005 19:33:23  
Why was you water pump parts so high ?? Last one I did the bearing ,seal,gaskets was only $30.00 ?about a year or two ago. Don't throw the old switch away ! Those switches can most of the time be saved with a little time. Just carefully pry up the tabs holding it together watch the order it comes apart,clean everything up on a wire wheel,restake the rivets,put some vaseline in there to help stop future corrosion and put it back together.I've had to make new rivets that the contact burned up on.I think I used the copper split rivets like for holding a dog license on the collar.

[Log in to Reply]  [No Email]
55 50

10-19-2005 21:23:47




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to farmerboy, 10-19-2005 19:33:23  
My gosh. Think about how old that tractor is and be thankful you can still get the parts. No one ever got rich fixing up old tractors!



[Log in to Reply]  [No Email]
Farmerboy

10-20-2005 15:20:08




Report to Moderator
 Re: Aww man! More expenses on my 1955 60 in reply to 55 50, 10-19-2005 21:23:47  
Do you understand the phrase "tongue-in-cheek"?

Lighten up.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy