Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

530 oil lines

Welcome Guest, Log in or Register
Author 
dale neal

10-09-2005 18:02:52




Report to Moderator

I have a 1959 530 that lost oil pressure. I found that an oil line from the oil pump has broken. I removed the oil pump and the broken line but I don't know where the small lines from the pump go to. Need info.




[Log in to Reply]   [No Email]
Tyler Buchheit

10-11-2005 04:36:08




Report to Moderator
 Re: 530 oil lines in reply to dale neal, 10-09-2005 18:02:52  
I have a complete set of oil lines for the 530 (good used). I'd be happy to sell you the one you need for a fair price. Let me know.
Tyler



[Log in to Reply]  [No Email]
Tyler Buchheit

10-11-2005 04:45:39




Report to Moderator
 Re: 530 oil lines in reply to Tyler Buchheit, 10-11-2005 04:36:08  
$15 shipped to you USPS...assuming that you are in the USA
I think that this is a fair price and in line with salvage yards.
The lines are in execellent condition.
Let me know
[email protected]



[Log in to Reply]  [No Email]
DALE NEAL

10-11-2005 06:22:45




Report to Moderator
 Re: 530 oil lines in reply to Tyler Buchheit, 10-11-2005 04:45:39  
SEND ME AN ADDRESS AND I WILL SEND YOU THE MONEY. LET ME KNOW HOW YOU PERFER TO BE PAID.



[Log in to Reply]  [No Email]
DALE NEAL

10-11-2005 04:41:05




Report to Moderator
 Re: 530 oil lines in reply to Tyler Buchheit, 10-11-2005 04:36:08  
GIVE ME A PRICE.



[Log in to Reply]  [No Email]
Mike M

10-10-2005 07:26:47




Report to Moderator
 Re: 530 oil lines in reply to dale neal, 10-09-2005 18:02:52  
Do you have a JD parts book on this model ? For lack of any better info on my part these books did show very good details and should hold the answer.



[Log in to Reply]  [No Email]
ChuckW

10-10-2005 06:36:26




Report to Moderator
 Re: 530 oil lines in reply to dale neal, 10-09-2005 18:02:52  
I also had to use bent wrenches to get to some of them. Be careful in replacing and be sure to get them in position away from the crankshaft.



[Log in to Reply]  [No Email]
ChuckW

10-10-2005 06:34:42




Report to Moderator
 Re: 530 oil lines in reply to dale neal, 10-09-2005 18:02:52  
there are lines going to the governor, camshaft, rocker arm oilers, main bearings. I can advise you that the one in the center of the block is a bear and I had one broken there and had to remove the block to get to it. Hopefully this one is no broken. They had a straing setup on these lines.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy