Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

A couple pics for viewing pleasure.

Welcome Guest, Log in or Register
Author 
Loren

08-30-2005 19:21:54




Report to Moderator

The Corp. of Engineers is doing some work here locally, rebuilding the resevoir dam and adding some dikes/ponds and the such for water fowl. Finally got to sneak in to get a couple pics of the pans and tractors. There's 5 setup liike this, one more with one pan on and 2 more with some husky disc plows. Enjoy. Loren. OH,,, these are from a contracted outfit, not the Corp. third party image

third party image

third party image

[Log in to Reply]   [No Email]
txgrn

09-01-2005 05:49:08




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren, 08-30-2005 19:21:54  
We have a local guy that uses those but pulls them with red 8 wheel drives. Really move a lot of dirt in a short time from point A to point B.

But for pond building with a dam, where the scoopings go into the dam and not off somewhere else, a good D7 or 8 is hard to beat....back and forth, back and forth, never misses a lick. These guys have to come thru, pick up, haul off, dump, come back, pick up..... .... lot of wasted time....unless you need the dirt elsewhere.

Mark

[Log in to Reply]  [No Email]
Henry J

08-31-2005 06:53:24




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren, 08-30-2005 19:21:54  
That is the way most dirt is moved in central IL also. Only the puller of choice here is the big red with the four tracks on it.



[Log in to Reply]  [No Email]
North of Linoma Beach

08-31-2005 05:00:29




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren, 08-30-2005 19:21:54  
Bennington Impl. sold a stload of these machines with JD scrapers. The 9520 is primaraly marketed as a scraper tractor. The other post is correct, as the initial cost is much less than a Caterpillar, they can probably get 3 JD's for the cost of one D8. I am surprised at two things, one that the scrapers are Renolds,(made in McAllen, TX), and that the Agco, nee Caterpillar Challenger, have not made much impact in this market segment. The downside is that at some point these well used, and abused, tractors will come back on to the market as used. Hopefully they will then be shipped to Mexico where the abuse can continue.

[Log in to Reply]  [No Email]
Loren NC

08-30-2005 23:11:54




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren, 08-30-2005 19:21:54  
Glad to see that you indicated in the text that OH is your base. I think you make about the fourth "Loren" who posts here so we have to keep ourselves sorted out.



[Log in to Reply]  [No Email]
Loren

08-31-2005 17:27:41




Report to Moderator
 Loren NC, in reply to Loren NC, 08-30-2005 23:11:54  
That was actually an "Oh..." as in I forgot... Im western Oregon. Glad to say hi to another "me". :<)



[Log in to Reply]  [No Email]
Able

08-31-2005 04:30:37




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren NC, 08-30-2005 23:11:54  
The pictures are good,I enjoyed looking at them.



[Log in to Reply]  [No Email]
RalphinWI

08-30-2005 21:11:53




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to Loren, 08-30-2005 19:21:54  
I don't mean to be critical Loren, but this isn't any more pleasurable than the article in our local paper tonight. Homeland Security has provided 6 BearCat,(Ballistic Engineered Armored Response and Rescue Counter Attack Truck)armored trucks to the State of Wisconsin. Housed in Dane, Douglas, Eau Claire, LaCrosse, Oneida and Winnebago Counties. These have etc, etc and rotating turrets - 8 ton, bio and nuc detection, 85 MPH and $186,000. Just shows you what can be done by a group of politicians intent on buying votes and wasting money.

I'm as much of a Deere nut as anyone, but in my opinion, despite the power available the tractors or tires are not built (i.e. encountering a rock) for serious earth moving. Only the gov would send out a couple of megabucks worth of equipment to build a puddles for some ducks.

[Log in to Reply]  [No Email]
720Deere

08-31-2005 03:42:06




Report to Moderator
 Re: A couple pics for viewing pleasure. in reply to RalphinWI, 08-30-2005 21:11:53  
Ralph,

I have been in the earth moving business for a few years and I can tell you that those tractor pulled scrapers are no joke. They are very effecient and cost less than half the price of a CAT 621 scraper. Add to that the fact that they do not need a $500,000.00 D8 to push them and things keep looking better.

No they are not good for quarry stripping or other rocky areas, but like anything else when used properly they are very effective. Here on the east coast they are the rage. John Deere seems to be the tractor of choice and some people are using the CAT Challenger rubber track machines. We own one JD setup, but the majority of our dirt is moved with an excavator and articulated dumps.

[Log in to Reply]  [No Email]
Loren

08-30-2005 21:41:24




Report to Moderator
 Take hold of a cool one Ralph. in reply to RalphinWI, 08-30-2005 21:11:53  
These are in process due to the resevoir dam needing to be rebuilt after years of seeping. I'm sure the wetlands type work is a kill two with one stone situation. The mass of the machinery is in the area for the recon work, they spread some of it to the wetlands stuff since now's the time. Kosher? Ahhhh,, deep breathes. :>)



[Log in to Reply]  [No Email]
Luke S

08-31-2005 15:09:14




Report to Moderator
 Re: Take hold of a cool one Ralph. in reply to Loren, 08-30-2005 21:41:24  
Lots of those running here in Missouri too. I have a customer that has 5 of them, he drives one and his four sons drive the others.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy