Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Brass Carburetors

Welcome Guest, Log in or Register
Author 
Skyhawk Greg

08-12-2005 08:54:04




Report to Moderator

Good Morning

Simple question here, but the answers seem to vary. The John Deere Model D is listed as having a DLTX-6 carburetor from S/N 109944 to 128110. This carb is known to be a brass carb. But, what does this mean? According to a reliable source, this means that the main body of the carb is brass, but that all of the float bowls were cast iron. I was happy with this information, until reading a back issue of Two Cylinder, specifically Nov/Dec 1997. This article clearly states that the float bowls were brass within this serial number range. Any thoughts? Thank you.

[Log in to Reply]   [No Email]
Duane Larson

08-12-2005 10:56:39




Report to Moderator
 Re: Brass Carburetors in reply to Skyhawk Greg, 08-12-2005 08:54:04  
Skyhawk Greg,
The DLTX series of carburetors started with bronze body castings and bronze bowls. The DLTX3, used on the D from 49774-109943, is the only example of that of which I am aware. The DLTX series was then modified in shape, and changed to cast iron bowls. The DLTX6, used on the D from 109944-128110, had a bronze body and cast iron bowl. It was replaced by the DLTX16 with a cast iron body and cast iron bowl, and was used from 128111-161644.

Note that Marvel Schebler used a scheme of adding 10 when they changed to the cast iron body. The DLTX8 (early A) went to the DLTX18, the DLTX9 (early AR) went to the DLTX19, and the DLTX6 to the 16, etc. There never was a bronze body carb for the B, nor for the G.

I looked at the Two Cylinder article, and indeed the reference to a bronze bowl appears to me to be incorrect. Or if the DLTX6 ever had a bronze bowl, I have not seen one (but .... never say never).

[Log in to Reply]  [No Email]
SKyhawk Greg

08-12-2005 11:08:59




Report to Moderator
 Re: Brass Carburetors in reply to Duane Larson, 08-12-2005 10:56:39  
Thank you for the good explanation Duane. Greg



[Log in to Reply]  [No Email]
Glen in TX

08-12-2005 11:31:56




Report to Moderator
 Re: Brass Carburetors in reply to SKyhawk Greg, 08-12-2005 11:08:59  
Greg, Duane explained this well. Just wanted to add that I have not seen a bronze bowl on the later carbs either. I've bought a few NOS carb bowls over the years and they were all cast iron too but there could be some out there??



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy