Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

420 Crawler Points

Welcome Guest, Log in or Register
Author 
Red Dave

08-12-2005 08:46:39




Report to Moderator

Yea I know, I'm over here in foreign territory. Don't worry, I come in peace :)

I'm trying to help out a friend that has a John Deere 420 Crawler. It seems to eat points. I've put three sets in over the past year. They don't come out pitted, just looking like they got real hot, then they quit making contact.

We've replaced the condenser & the coil. It's still a 6 volt system, so there shouldn't be a ballast resistor issue should there?

Had been using aftermarket parts, (made in Mexico) so decided to try purebred JD parts, right out of a green & yellow box, to see if there is any difference. Guess what, they look identical and also are stamped "made in Mexico". Oh well.

I've been gaping at .020 because that's what the he told me the book called for. Is that the right gap?

As soon as I stick a new set in it fires right up.

Are there some finer points about these 2 cylinder Johnnys that I'm missing that would cause this thing to go through points like this?

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy