Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

20/30 Series Top Link

Welcome Guest, Log in or Register
Author 
CFWelles

08-03-2005 03:03:25




Report to Moderator

I need some experienced input on the originality or lack thereof of a hook end for the 30 series top link. Recently I bought one in nice condition from a fellow on Ebay who advertised the link as "original". When received I immediately suspected originality of the hook end. First the cross sectional shape of the small hook is more oval like I have seen on known aftermarket top links as opposed to the more squared off shape of the JD small hook. Looking at the link from the left side (threads extending to the right) the number "JD2820" appears with the "JD" then a diamond shape and "7" above the part numbers. I have two top links with the hook end in good shape that I am certain are original. On them the part number is on the right (threads extending to the left when viewing) and the number "F - 2820 - R" is stamped UPSIDE DOWN on this side. Both have the "JD" mark above the part number and one has a 1 and one has a 4 after the diamond shape. I am guessing the the 1,4, and 7? numbers are intended to be series or design revision numbers. Am asking for opinions on this because I want to be sure on this before I take the seller to task on this. I have seen other aftermarket hook ends that look like this, but this hook is the first one with a JD part number on it. I think the part number is really suspect because it is on the opposite side of the hook from where the number is on the ones I have that I am sure are originals, is arranged upside down from the known originals and is formatted differently without the dash marks in the number. Does anyone or has anyone seen an aftermarket hook end for these tractors with a JD part number stamped on them? Would appreciate any comments by those with more information than I on this part. Thanks, Charlie....also when I am describing left and right above it is with the small hook at the top of the hook end.

[Log in to Reply]   [No Email]
Mike M

08-03-2005 05:20:35




Report to Moderator
 Re: 20/30 Series Top Link in reply to CFWelles, 08-03-2005 03:03:25  
All I can add is that I'd like to meet the person who designed such a stupid arrangement for a top link. I could show them what to do with it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy