Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Cutting and Bailing hay

Welcome Guest, Log in or Register
Author 
MNBob

07-17-2005 05:52:02




Report to Moderator

Just picked up a JD 1219 Haybine. Have a tonutu 8 wheel rake and JD 336 bailer. Tips/advise appreciated. Last time I made hay was with my Dad using horse drawn equipment. (Many years ago)I will use my JD 4010, The 1219 and rake have just one hyd hose, is that going to work ok. Everything else I have used has return lines. I need a set of manuals for the 1219, if you have a set to sell let me know. I can order them if none appear here.

[Log in to Reply]   [No Email]
Rodney A Johnson

07-18-2005 06:09:39




Report to Moderator
 Re: Cutting and Bailing hay in reply to MNBob, 07-17-2005 05:52:02  
I'm located near Rochester, MN and usually it rains rather frequently making putting up hay really tough. Although lately this year its been really dry (got 100 bales for 2nd crop where I got over 300 for 1st).

I have a newer 1209 (single cylinder to lift), 336 with #30 thrower, 56 NH side rake, and a IH conditioner.

The 1209s (in my experience observation) does not do well when it comes to drying down hay as compared to to other MoCos like New Holland, Gehl, or New Idea. I suspect it is largely due to the large tractor tread design vs. the smaller spiral design of the New Holland. This means less breaks in the stems resulting in slower drying time.

Anyway, the 1219 has same roller design. Hopefully you have better luck. I figure I need about 4-5 days depending upon whether, amount of grass, alfalfa, and clover. I cut one day, and then when the top starts to get crispy, I use the IH conditioner to fluff the hay back up. Then the next day I usually rake the hay and bale late afternoon.

Without the IH conditioner, it would cost me another day in dry time. Almost every one else in the neighborhood bales in the same interval, but don't require a trip through the field with a conditioner like I do.

But, I like my 1209, cause it is rather tough.

I pull my stuff with a 3010D or 4020D.

[Log in to Reply]  [No Email]
farmer boy

07-17-2005 11:55:43




Report to Moderator
 Re: Cutting and Bailing hay in reply to MNBob, 07-17-2005 05:52:02  
I have used the JD 1219 haybine for many year and never had any problems. One hydraulic hose is for raising the machine and it is gravity lowered which is just fine. You can also remove the manual swing arm and install a hyd. cylinder in its place. On the other hand I used a hay teader for the first time this year and it cut may drying time down by a day.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy