Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Detailed Picture of DLTX-71 Carb's Internal Passag

Welcome Guest, Log in or Register
Author 
Pat Browning

07-06-2005 17:03:49




Report to Moderator

Some time back, Clooney responded to a fellow having grief with his DLTX-71, and in his closing remarks, said "If you want more details on that carb's internal passages & what to clean, just E-mail me & I will send a detailed picture of the carb & it's internal passages that need cleaning �.."

Clooney is "out of pocket" for now, and what I am trying to learn if anyone out there ever received such a drawing from Clooney. And then if "yes," would you be willing to share a copy of Clooney's drawing with me? I can be reached at [email protected], or by telephone 830-627-0430, and will be very grateful for a response. Thanks.

[Log in to Reply]   [No Email]
Skyhawk Greg

07-07-2005 11:19:16




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-06-2005 17:03:49  
Pat, I have the JD carburetor manual at home. If you still need a diagram later tonight, send an e-mail to my house at [email protected]. I can scan the page for you. Greg



[Log in to Reply]  [No Email]
Pat Browning

07-07-2005 13:40:28




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Skyhawk Greg, 07-07-2005 11:19:16  
Greg -- thank you. I have sent an eml to your house in search of data. Thank you very much for the offer. PatB



[Log in to Reply]  [No Email]
Skyhawk Greg

07-07-2005 13:59:47




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-07-2005 13:40:28  
Pat, If there is anything else you would like out of the manual, let me know using the skypark e-mail address. I am leaving work now to go to a baseball game and will be home later tonight. Will try to get it out tonight, but if the game is late (meaning going out afterward with the other parents), it will go out tomorrow morning at the latest. Greg



[Log in to Reply]  [No Email]
Pat Browning

07-07-2005 14:14:03




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Skyhawk Greg, 07-07-2005 13:59:47  
Greg -- that should do it. DLTX-26 & -46 carbs are my main interest at this time. I will keep your eml addr handy. Next trip I take to the JD dealer, I will look over the SM2024 they have -- and if I need any other pages, will let you know. Thanks

And don't be concerned about a day or two -- enjoy the ballgame and your friends. Life is too short to hurry things like friendships! PatB



[Log in to Reply]  [No Email]
Mike M

07-07-2005 05:27:04




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-06-2005 17:03:49  
Pat; I think that the Deere Carb. repair manual has these drawings in it. If you need the manual # I'll have to look tonight.



[Log in to Reply]  [No Email]
Pat Browning

07-07-2005 06:32:44




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Mike M, 07-07-2005 05:27:04  
Thanks Mike -- that will help.



[Log in to Reply]  [No Email]
Glen in TX

07-07-2005 06:46:26




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-07-2005 06:32:44  
Mike is talking about the SM-2024 shop manual for carburetors used on JD engines and it does have some drawings of the passage ways of carbs in it. It covers DLTX and other carbs used on 2 cyld tractors, pony motors, power units and harvesting equipment. A good ID chart showing load nozzle and economizer plug ID for the letter series tractors was reprinted in the January 1988 issue of Green Magazine.

[Log in to Reply]  [No Email]
Pat Browning

07-07-2005 11:16:07




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Glen in TX, 07-07-2005 06:46:26  
Glen -- The JD catalog lists the SM2024 as being "Carburetors for JD engines (for 40, 50, 60, 70, 80, 320, 330, 420, 430, 435, 520, 530, 620, 630, and 720 Tractors)".

I believe these are all tractors with duplex induction carbs - no?

Confused in New Braunfels



[Log in to Reply]  [No Email]
Glen in TX

07-07-2005 11:58:09




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-07-2005 11:16:07  
Pat, Unless JD has changed the contents of manual it should cover most all the 2 cyld. tractor carbs. I have had copy of the SM2024 for years and it is a invaluable source of info on the carbs for JD tractors A to R and 40-830 as well as the pony engine carbs. It covers the Marvel Schebler DLTX single & dual induction, TSX, TSG LP, Dual Induction LP, and some other Zenith carbs used by JD also. A seperate chapter in it on the DLTX-26 & 46 too. It also covers carbs used on power units, balers, beet harvesters, combines, cotton pickers, forage harvesters, & windrowers built during the 2 cyld. era. The SM2024 however does NOT cover the early carbs used on the D and GP tractors or the E engines. Check with the service manager at a local dealer and see if they have one you can take a peek at.

[Log in to Reply]  [No Email]
Mike M

07-07-2005 13:11:20




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Glen in TX, 07-07-2005 11:58:09  
Mine has all that stuff in it too. They could of cut some of it out ? You won't know until you order one.I've had mine for many years.



[Log in to Reply]  [No Email]
F-I-T

07-06-2005 17:34:15




Report to Moderator
 Re: Detailed Picture of DLTX-71 Carb's Internal Pa in reply to Pat Browning, 07-06-2005 17:03:49  
Pat:

I can tell you that Clooney normally tells those who receive his drawings and sketches not to post them or share them. He puts a lot of work into deciphering some of those old Deere diagrams and "fixing" them, and I'm not sure that he wants them in the public domain.

You might send him and e-mail and get his input, as I'm not trying to speak for him, but I have a feel for what he has posted and not posted in the past.

Frank

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy