Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3 brush gen problems

Welcome Guest, Log in or Register
Author 
Dave Gardiner

07-06-2005 09:49:10




Report to Moderator

I have a 3 brush gen on a newly restored '50 JDB. I rebuilt the gen with new bearings new brushes and springs and a new VR. I have plolaried the gen by grounding the F lug and flashing with -6VDC on the A lug.
As soon as the RPM of the engines picks up the ampmeter pegs at discharge.
I tried and old VR with the same results. I have tested the gen by putting -6 VDC on the A lug and the gen will motor, but if I ground the F lug the gen stops turning.
Could someone post a schematic of a 4 wire VR or give me some hintd as to what to check next?

[Log in to Reply]   [No Email]
Ken WI

07-06-2005 19:34:36




Report to Moderator
 Re: 3 brush gen problems in reply to Dave Gardiner, 07-06-2005 09:49:10  
Dave,
I had the exact same situation w/ an M. After jumping thru all the hoops, I finally flashed it w/ the opposite polarity (+6v w/ a battery charger) & away it went. Works perfect now.

KB



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy