Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Drain Plug Help!!

Welcome Guest, Log in or Register
Author 
Mitchp

07-05-2005 07:38:35




Report to Moderator

I'm currently in the process of painting my john deere A (46 model) I need to drain the coolent so i can get the water temp sending unit out. I'm not sure how long the coolent has been in there so i'm gonna put new in, problem is i cannot get the drain plug out, a open end wrench keeps wanting to slip on the square head, and not enough is sticking out to get a socket on there. How in the world can i get this out???

[Log in to Reply]   [No Email]
Skyhawk Greg

07-07-2005 12:32:16




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
Mitch, Sounds like you've accomplished what you were after. Just in case you come across this again, this might help. If the square corners are still uasable, I find a twelve point socket that will snugly fit on the square head. It must be a twelve point, not a six point. Then you can use a regular breaker bar to remove the stuck plug. Just did this within the last week. Greg



[Log in to Reply]  [No Email]
mitchp

07-05-2005 20:14:07




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
Well i got the coolent out!!!! i was gonna take the lower pipe off and when i took the left side bolt out, here came the antifreeze, looks like at least 8 gallons came out, i put the bolt back in and no leaks so far. Thanks for all the responces, from now on i'll know how to get it out when it needs changing LOL



[Log in to Reply]  [No Email]
JDBert

07-05-2005 17:56:04




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
Is there enuff of the plug itself sticking out to take a grinder and make yourself more of a square head to get a cresent wrench on?



[Log in to Reply]  [No Email]
Sandflat Bob

07-05-2005 12:45:56




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
My best luck on stuck drain plugs is using an air operated chisel. Hasn't failed yet. The impact sure seems to help. Take it slow and easy, both ways until it starts to move.

Good luck,

Bob



[Log in to Reply]  [No Email]
Sandflat Bob

07-05-2005 12:45:34




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
My best luck on stuck drain plugs is using an air operated chisel. Hasn't failed yet. The impact sure seems to help. Take it slow and easy, both ways until it starts to move.

Good luck,

Bob



[Log in to Reply]  [No Email]
720Deere

07-05-2005 10:01:59




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
It sounds like you may need to try a pipe wrench.



[Log in to Reply]  [No Email]
Mike M

07-05-2005 09:53:14




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
I would NOT heat it as I did that once and had a bad experience. You may end up drilling it out,start as near the center as you can. Get a small hole and work larger you should be able to peel out the threads then you will need a tap to clean it all up. I would start by unbolting the water inlet on the bottom front of the head and drain out as much as you can,you may just say the heck with the plug and leave it alone.

[Log in to Reply]  [No Email]
mitchp

07-05-2005 09:58:43




Report to Moderator
 Re: Drain Plug Help!! in reply to Mike M, 07-05-2005 09:53:14  
hey mike m, if i take the lower radiator pipe off from the head and the bottom of the radiator, will all my coolent drain out? i don't care how i get it out just as long as its out :o)



[Log in to Reply]  [No Email]
Mike M

07-05-2005 12:18:58




Report to Moderator
 Re: Drain Plug Help!! in reply to mitchp, 07-05-2005 09:58:43  
You should get on heck of a blast ! There may be some left in the bottom of the head area over that plug but you should be able to flush out the crud well with a hose.



[Log in to Reply]  [No Email]
Thane

07-05-2005 09:04:43




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
If there is enough for a wrench to slip on, there should be enough for locking pliers (Vice Grips), maybe?



[Log in to Reply]  [No Email]
MITCHP

07-05-2005 09:57:01




Report to Moderator
 Re: Drain Plug Help!! in reply to Thane, 07-05-2005 09:04:43  
hey thane, yeah i tried that but no luck, they just want to slip too.



[Log in to Reply]  [No Email]
Dan in Ohio

07-05-2005 08:12:28




Report to Moderator
 Re: Drain Plug Help!! in reply to Mitchp, 07-05-2005 07:38:35  
Mitch, I have had success using a blunt ended chissel to turn plugs or bolts when unable to get a wrench to hold. Just use my trusty 3lbs. hammer and sharp blows in the direction you want to turn.



[Log in to Reply]  [No Email]
Trump

07-05-2005 09:54:55




Report to Moderator
 Re: Drain Plug Help!! in reply to Dan in Ohio, 07-05-2005 08:12:28  
And start soaking it with pb blaster or some other type of penetrating oil.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy