Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

DLTX-16 Carb

Welcome Guest, Log in or Register
Author 
Brad D

07-01-2005 07:03:42




Report to Moderator

Hi group, I am making an attempt to rebuild a dltx 16 carb off a 39 D. The nozzel appears to be broken. The end is about 3/16" from being flush with the main body. I have never rebuilt one of these before so this is all new. Does anybody make a tool to remove the nozzel from the body? Thanks in advance for all the advice and help




[Log in to Reply]   [No Email]
Dave NE IA

07-06-2005 19:45:33




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
I find the simplest way is a battery powered drill and a metal building self drilling roof screw. Slide a small fender washer over it first and let it drill in. common sence is a must. Dave NE IA



[Log in to Reply]  [No Email]
F-I-T

07-02-2005 15:17:12




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
Brad:

You'll also find that parts like nozzles are much easier to remove if you can get that carburetor body warmed up with a propane flame and let to cool once or twice. Makes removing the plugs and fittings easier, too.

Air dry the carb really well. Warm the carb body with a soft propane torch flame, and increase it as things de-gas and the tarry deposits start to melt. Do this outside away from other people, pets, and property. If you are concerned with the old fuel fumes, wash it down, inside and out with some soapy water, or rinse it with brake cleaner that contains Perchlorethylene. "Perc" is not flammable and is used in liquid fire extinguishers. Useful to "de-tox" gas tanks and carburetors before subjecting them to open flame.

After a heat and cool cycle or two, I have had some, but not all, nozzles actually fall out with no tapping.

Frank

[Log in to Reply]  [No Email]
Pat Browning

07-02-2005 13:45:42




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
Not all fuel nozzles are created equal! If you are ever found working on a carburetor off a model "H" tractor (DLTX-26/46), you would use a smaller diameter tap into the nozzle, namely a 6-32 tap; and once again, "no," the threads left behind in the nozzle will not interfere with fuel flow so no need to fret about those. The same slide hammer or "knocker" concept is used, just be aware -- and do not bust the nozzle on a carb with one that is smaller! 10-24 is nearly two times larger than 6-32. PatB

[Log in to Reply]  [No Email]
Catskill Pete

07-01-2005 21:53:37




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
There is an excellent description of how remove the nozzle at this site.

http://www.retiredtractors.com/Q/Slidehammer.html



[Log in to Reply]  [No Email]
Skyhawk Greg

07-01-2005 12:22:29




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
Mike hit it on the head. The only thing I would add is that you may have to run a tap through the nozzle opening to make good threads before inserting the slide hammer.



[Log in to Reply]  [No Email]
mike1111

07-01-2005 07:18:07




Report to Moderator
 Re: DLTX-16 Carb in reply to Brad D, 07-01-2005 07:03:42  
hi,we used a dent puller slide hammer to get the nozzel out. find a bolt that threads into bottom of the nozzel, and we ground the head off enough to fit the bolt into the screw holder in the dent puller. about 4 to 5 pops and the nozzel was out. seems there is a plan to build one on Genes antique John deeres tractor page.good luck,, mike



[Log in to Reply]  [No Email]
Brad D

07-05-2005 03:46:13




Report to Moderator
 Re: DLTX-16 Carb in reply to mike1111, 07-01-2005 07:18:07  
Thanks guys for all the advice, I will try the slide hammer idea this week. Thanks again

Brad Duncan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy