Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Best way to Clean oilbath air cleaner on JD 730D

Welcome Guest, Log in or Register
Author 
Mark Parker

05-10-2005 21:32:19




Report to Moderator

I have the air cleaner of my JD 730 Diesel and the wire mess is plugged full of old oil and dirt and slug what is the best way to clean this out. Drop it in a bucket of Gas for a couple. Find a hot tank to put in it. Looking for the way that works the best.




[Log in to Reply]   [No Email]
buickanddeere

05-11-2005 07:24:12




Report to Moderator
 Better yet.... toss the thing away Clean oilbat in reply to Mark Parker, 05-10-2005 21:32:19  
Yank the metal mesh out and replace with a dry air filter inside. Cleans the air better too.



[Log in to Reply]  [No Email]
Mike M

05-12-2005 06:52:35




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to buickanddeere, 05-11-2005 07:24:12  
If people would clean out the oil baths like they were suspose to then I doubt you would have any trouble from them and cheaper cleaner air to boot.



[Log in to Reply]  [No Email]
buickanddeere

05-12-2005 08:16:15




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to Mike M, 05-12-2005 06:52:35  
A quality name brand paper air filter removes more dirt than an properly working oilbath aircleaner. Let alone the oil baths with oil too heavy, too light, too low level, too high level or full of dirt. The oil bath was used as it was better than nothing and Farmer Brown could service it with basic equipment, materials and knowhow at low cost. For proof look at the engine life of 4020's with oilbath aircleaners Vs. paper filters.

[Log in to Reply]  [No Email]
mike brown

05-11-2005 08:48:42




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to buickanddeere, 05-11-2005 07:24:12  
??? More info please? Part numbers?
Thanks



[Log in to Reply]  [No Email]
buickanddeere

05-12-2005 05:12:07




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to mike brown, 05-11-2005 08:48:42  
Albert at Renaissance tractor in Washington State. Or measure and make your own after cross referencing the size from the chart in the back of a Fram filter catalogue.



[Log in to Reply]  [No Email]
3010 Ken

05-13-2005 04:31:53




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to buickanddeere, 05-12-2005 05:12:07  
Mr.BuickandDeere;I've been wanting to convert the oil bath on my 3010 diesel to paper for some time now.Was told about a year ago that a late 3020 air cleaner would bolt right up.Do you know if this is true? Anyway,Thanks for the post.I may have to call Albert at Reinassance Tractor.Kenny



[Log in to Reply]  [No Email]
buickanddeere

05-13-2005 05:09:28




Report to Moderator
 Re: Better yet.... toss the thing away Clean oi in reply to 3010 Ken, 05-13-2005 04:31:53  
Late 3020 dry filter bolts on.



[Log in to Reply]  [No Email]
buickanddeere

05-11-2005 07:22:39




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
Hot water mixed with lye and let soak .



[Log in to Reply]  [No Email]
wilamayb

05-11-2005 05:13:31




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
How do you get it off? I tried to do the one on my 730D with no luck. I took all the bolts out, or so I think, but it didnt budge. I even tapped it with a rubber hammer with no results.



[Log in to Reply]  [No Email]
Mike M

05-11-2005 03:48:51




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
I just did a nasty one on a 70D. I soaked it in the parts washer solvent for several days with little improvement. Took a pressure washer to it and it cleaned up great ! Had a 0 degree roto nozzle on a small cheap pressure washer that thing really blew that junk out of the fine screens.



[Log in to Reply]  [No Email]
James2

05-11-2005 05:44:03




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mike M, 05-11-2005 03:48:51  
I've read mechanic's comments in other forums/publications that give the same advice; ie. a power washer works great.



[Log in to Reply]  [No Email]
RonMC

05-11-2005 00:31:46




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
When we used to service the oil bath a/c"s on cars (doesn"t that take you back ?) we just washed out the pan in solvent and agitated the wire enclosure in a bucket of the same. We"d just let it settle out between uses and leave it in the same 5 gallon bucket. The sediment hardens in the bottom quite nicely and next time doesn"t seem to get riled up if you don"t actually get in and paddle around ! Ron

[Log in to Reply]  [No Email]
ksb 60

05-10-2005 21:57:48




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
I just did this on my 720. I put it in a 5 gallon bucket of kerosene. Let it sit for awhile then plung it up and down a few times.I"d do this a couple times a day, or when ever I walked by it. I let it sit in the bucket for about a week while I was waiting on other parts. Seemed to work ok for me I wasn"t in a hurry though. When it came time to put things back together I removed it blew it out the best I could, then let it sit on the bench for a afternoon to drain out. Not sure if I got all the crud out but it"s a heck of alot cleaner than when I started.

Ken

[Log in to Reply]  [No Email]
Chuck in Ks.

05-10-2005 21:50:57




Report to Moderator
 Re: Best way to Clean oilbath air cleaner on JD 73 in reply to Mark Parker, 05-10-2005 21:32:19  
The manual on my 720D says that if you can see thru it, then it is clean. I used an air hose to clean out what debris there was in mine. Wiped out the bowl, added oil and reinstalled.
I don't know why you couldn't use a parts cleaner (gas, Lacquer thinner) on it if you wanted.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy