Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Brought the 4230 home yesterday!

Welcome Guest, Log in or Register
Author 
R. John Johnson

04-23-2005 13:12:02




Report to Moderator

Finally got the 4230 home yesterday. Up til now I was too busy calving out cows to go get it from my cousins.

Now the fun starts. Lots of little things to work on. First is the seat. It has an aftermarket one on the original suspension. Did I read somewhere that a seat from a 40 series will fit on the existing suspension?

I have to install the ISO coupler kits on the remotes.

The Tachometer wobbles sometimes. I am going to start by cleaning the cable and re-lubing it.

I have a set of steps off a 6400 that I am going to mount on it.

I need to get the radio working.

I need to wire in a connector to match the bale carrier control box. This will be with relay to run on keyed power.

Got the most important job done. My son Zach got his first ride in the new to us tractor.

I'm sure I will find some more, but I'll tackle them as I find them. I will keep everyone in touch as I get things done. I still don't have much time to work on it. Still takes all moring just to get the cows fed and there's lots of odd jobs that need to get done. Take care everyone.

John

[Log in to Reply]   [No Email]
txgrn

04-24-2005 08:09:40




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to R. John Johnson, 04-23-2005 13:12:02  
I certainly like mine and appreciate the improvements over the predecessor 4020.

On the radio, maybe I'm deaf, but even with the sound guard cab, and the AC blower off, I still can't hear the radio over the roar of the exhaust and that humongus fan.

Mark



[Log in to Reply]  [No Email]
R. John Johnson

04-24-2005 13:49:20




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to txgrn, 04-24-2005 08:09:40  
Mark

On high the fan is pretty loud in mine, but I don't hear the exhaust noise. It seems quiet enough with the fan on low that I should be able to enjoy a radio. Looked under the dash yesterday and was very pleased to see a large relay and wiring already in place from the factory. Electrical accesories will be a snap.

John



[Log in to Reply]  [No Email]
txgrn

04-25-2005 07:19:24




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to R. John Johnson, 04-24-2005 13:49:20  
Yeah, I like the way they have 2 busses; one directly connected to the batt and the other via the ign key.

Also like their little circuit breakers that you can bolt on the terminals. Real convenient.

Mark



[Log in to Reply]  [No Email]
TIMAR

04-24-2005 07:42:42




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to R. John Johnson, 04-23-2005 13:12:02  
We put a air-suspension seat in our 4230. Made a world of difference and didn"t cost too much, but that was 6 yrs ago. Got it from our JD dealer.



[Log in to Reply]  [No Email]
R. John Johnson

04-24-2005 13:52:09




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to TIMAR, 04-24-2005 07:42:42  
TIMAR

Was that a combination seat and suspension? Did you have to widen the bottom of the SGB where the old suspension goes? I was looking at Tractorseats dot com and they needed to add a piece to make the gap big enough to install their seat.

John



[Log in to Reply]  [No Email]
txgrn

04-25-2005 07:21:32




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to R. John Johnson, 04-24-2005 13:52:09  
I just let the air out of the rear tires; and slow down.

Mark



[Log in to Reply]  [No Email]
TIMAR

04-24-2005 20:28:25




Report to Moderator
 Re: Brought the 4230 home yesterday! in reply to R. John Johnson, 04-24-2005 13:52:09  
That depends on what year your 4230 is. The earlier ones needed to be modified. The suspension is a stand-alone deal. You have to mount your own seat.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy