Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

720 Gets Flipper!

Welcome Guest, Log in or Register
Author 
DMCI

04-13-2005 21:06:30




Report to Moderator

third party image

You know as much as I like my Johnny Popper, the putting on and taking off of the coffee can is a real pain!

I have been working for some years to think of a way to be rid of the darn thing. Well, I finally figured it out. Can't see any down side.

Here is the result. Secret is four small (1/4") welds with a MIG unit to keep the flipper from flipping off the beveled top of the muffler. Finally!!!

Old unit on top of radiator cap for picture. Now in loft in barn (Coffee can too!) with other parts not being used. No. 4 flipper at dealership is just the right size

D.

[Log in to Reply]   [No Email]
Duben

04-14-2005 20:41:43




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
Had one on my 730 and it was OK until we had a plow day. When it worked really hard, it would "bang" so hard that it actually broke. I went down to NAPA and found a short curved tail pipe and put that in the top of the muffler so I have a curved pipe opening to the side. Works great.



[Log in to Reply]  [No Email]
jddriver

04-14-2005 07:29:45




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
I have several of the old casr type but I love that clank-clank sound when they are idling.when they are working the flapper stands straight up.Steve



[Log in to Reply]  [No Email]
DMCI

04-14-2005 08:49:27




Report to Moderator
 Re: 720 Gets Flipper! in reply to jddriver, 04-14-2005 07:29:45  
That is an issue.

I tested it this morning and of course when the engine is working it is not a problem.

Clanking occurs when engine is idling below about 600 rpm. 650 and above there is enough energy to keep in above the bottom. I generally don't operate there and the benefit of never forgetting to cover the exhaust out weighs the small problem of clanking when idling.

Of course in the fifties when I started operating equipment nobody over heard of ear protection, so the noise isn't that big a deal. Infact, its a visual feedback on how the engine is running.

What?

D. :)

[Log in to Reply]  [No Email]
Dan in Ohio

04-14-2005 07:19:45




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
D.

I saw an add somewhere (I think in GM) that someone is selling the flipper cap made of cast, like the original it says? That might stop the rattling clatter you are going to hear.



[Log in to Reply]  [No Email]
JDBert

04-14-2005 06:35:43




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
Not to rain on your parade but I had one on my 730 diesel and after a day in the field with it on I had to take it back off because it drove me nuts. It'll bang about every time each piston comes around and does a exhaust stroke. Just my experience, but they do look nice.



[Log in to Reply]  [No Email]
buickanddeere

04-14-2005 05:53:38




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
I like to turn the flapper or a curved stack around so it faces the front. That deflects quite a few db's of hearing loss away from your ears.



[Log in to Reply]  [No Email]
2510bill

04-13-2005 21:50:24




Report to Moderator
 Re: 720 Gets Flipper! in reply to DMCI, 04-13-2005 21:06:30  
Yea but now the coffee can gets replaced by the rag you need to wipe the darn soot off the hood when the flipper deflects it back down! But- if you move slow like me you will have better luck wiping the soot than running from the coffee can as it plummets back to earth after you start the motor with it on. Nothing can shoot a coffee can farther than a big 2 cyl! I remember one time (I was younger and not too wise) when I parked my G on a sidehill and experimented with how high it would shoot the can. I bet it went over 75 feet up!

[Log in to Reply]  [No Email]
mike brown

04-14-2005 04:50:51




Report to Moderator
 Re: 720 Gets Flipper! in reply to 2510bill, 04-13-2005 21:50:24  
It's still gonna rattle and spoil that sweet poppin johnnie sound at idle.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy