Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4240 muffler on a 4230????

Welcome Guest, Log in or Register
Author 
H2

03-24-2005 18:35:50




Report to Moderator

Will a 4240 muffler fit on a 4230? I didn't know if the larger oval of the 4240 would fit and how to compensate for it not having an inlet flare.




[Log in to Reply]   [No Email]
Mike Aylward

03-25-2005 05:44:50




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to H2, 03-24-2005 18:35:50  
The oval on the 4240 muffler is the same size as on the 4230 and a late 4020 as well, which is what I converted to the 4240 muffler. As one poster asked, yes, it does help the tractor to run cooler. I also had trouble with small branches catching the muffler extension and bending it. A late 4020 has a smaller exhaust outlet than an earlier 4020 has. It may help on noise somewhat but the larger opening seems to help on engine temperature, especially under heavy load. Hope this helps. Mike

[Log in to Reply]  [No Email]
txblu

03-27-2005 06:36:39




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Mike Aylward, 03-25-2005 05:44:50  
That's what I was looking for. Makes sense.

Noise is the only reason I can see to reduce the exhaust dimensions but it's stupid.

Everything I have read and know about diesels is that they have to breathe to work and when you choke off their buttox, you strangle them.

Mark



[Log in to Reply]  [No Email]
BillNNY

03-25-2005 04:39:55




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to H2, 03-24-2005 18:35:50  
The 4240 muffler has the same size oval, but is taller. It fits thru the hood fine. We repowered our 4230 with a 466. The bigger muffler allows for better breathing on the larger displacement engine.



[Log in to Reply]  [No Email]
txblu

03-25-2005 05:25:02




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to BillNNY, 03-25-2005 04:39:55  
Would you define "better breathing" please?

Thanks,

Mark



[Log in to Reply]  [No Email]
Randy Warren

03-24-2005 19:24:49




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to H2, 03-24-2005 18:35:50  
4240 muffler will fit on a 4230 I put one on my 4230 it does not have a flare on it just a clamp.it will give you a bigger outlet pipe won't bend so easy.



[Log in to Reply]  [No Email]
H2

03-25-2005 03:20:50




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Randy Warren, 03-24-2005 19:24:49  
Thanks for the reply. Was the oval bigger on the 4240 muffler? If so, was it a tight fit through the hood? Shoup sales mufflers some what less than Deere, but I'd guess you get what you pay for. Where did you buy yours?



[Log in to Reply]  [No Email]
Randy Warren

03-25-2005 04:10:24




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to H2, 03-25-2005 03:20:50  
I got my muffler at john deere it was the the same size oval as the 4230 muffler fit the hood fine. it is a little hard to reach the clamp to tighten it up but it can be done. I had a lot of trouble breaking the top out of the smaller muffler low tree limbs. j.d. muffler was $80.00 good luck.



[Log in to Reply]  [No Email]
txblu

03-25-2005 05:17:21




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Randy Warren, 03-25-2005 04:10:24  
Question Randy,

Did you happen to notice any drop in engine temp when you put the muffler on?

I know that turbo engines run hot if you don't let the gas out; hence the huge pipes on turbo's, but the 4230 is naturally aspired.

But..... it still might run cooler if you let the gas out faster. I'd like to know as mine has this creep to the high end of the temp gauge (under load) and I don't have anyone to help me get the hood off so I can/could wash out the radiator (after I slide the condenser coil out of the way). I hooked up the power sprayer the other day and put the engine on PTO rpm's; shot high pressure water thru what I could get to from the side while it was running. Got out a lotta crud. We'll see what that does.

Thanks,
Mark

[Log in to Reply]  [No Email]
thurlow

03-25-2005 08:13:18




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to txblu, 03-25-2005 05:17:21  
Hey Mark; RE: getting your hood off by yourself. Don't know how bad your muffler is "stuck"; I've taken hoods off by myself many a time by removing muffler and air cleaner stack; hood will only have to clear fuel and radiator openings..... ..If it doesn't need to come completely off, you can also pick it up and let the opening for muffler (in hood) rest/set on the large part of the muffler.



[Log in to Reply]  [No Email]
txblu

03-26-2005 16:39:24




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to thurlow, 03-25-2005 08:13:18  
Thanks. I'll probably do that. Have done the hood (like you said) on the 4010 several times and I guess this one works about the same.

Mark



[Log in to Reply]  [No Email]
Randy Warren

03-25-2005 05:42:43




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to txblu, 03-25-2005 05:17:21  
Yes mark I just put the muffler on this winter have not worked it to hard just used to put hay out. I did a in frame on it last winter and installed a new Radiator it has worked fine no over heating runing baler. good luck. Randy.



[Log in to Reply]  [No Email]
txblu

03-26-2005 16:37:26




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Randy Warren, 03-25-2005 05:42:43  
Thanks



[Log in to Reply]  [No Email]
Glen in TX

03-24-2005 19:13:30




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to H2, 03-24-2005 18:35:50  
Weld a pipe on it with a flare or cut the pipe off old muffler. I really don't think you are going to gain much with the other muffler anyway. Get some ear plugs and a straight pipe or have a custom muffler made? Go to Thomure in Missouri and have them make you one.



[Log in to Reply]  [No Email]
txblu

03-25-2005 05:23:06




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Glen in TX, 03-24-2005 19:13:30  
Glen,

Would you mind reading and commenting on my response to Randy Warren's thread (just above this one)?

Would appreciate it.

Thanks,

Mark



[Log in to Reply]  [No Email]
Glen in TX

03-25-2005 13:30:40




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to txblu, 03-25-2005 05:23:06  
I was just going by what a Stanley muffler catalog shows. The same aftermarket muffler for both with 2 15/16" inlet and 2 1/4" outlet. They show it to replace 4020 too. The early 4020 muffler had a 2 5/8" outlet. They do show another one later for 4240 & 4250 with a 2 5/8" outlet I didn't see before but it doesn't give a true inlet size. Replaces AR86597. JD probably has a different muffler sounds like? Usually get what you pay for on the aftermarket ones anyway. I don't know why you can't lift the hood by yourself. Yes, you may scratch the paint on muffler and air stack some but a block of wood between the hood and fuel tank have always held it up while I worked on them even in the wind.

[Log in to Reply]  [No Email]
txblu

03-26-2005 16:43:18




Report to Moderator
 Re: 4240 muffler on a 4230???? in reply to Glen in TX, 03-25-2005 13:30:40  
Thanks Glen,

I think I am going to go with a 4240 muffler. Supposed to have the same inlet flare, a little more length and a 2.625 (25/8) outlet.

I did a quick calc on internal dia vs area and the 4240 muffler has 50% more area.

Mark



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy