Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Can you tell by s/n if 830 is electric start or po

Welcome Guest, Log in or Register
Author 
David Hunt

03-24-2005 18:34:39




Report to Moderator

Found a 830 tractor and wondered if there is a way to tell if it was originally a electric start from the factory.Is there a way to tell from the serial number? thanx Dave




[Log in to Reply]   [No Email]
Duane(Pa)

03-25-2005 17:15:53




Report to Moderator
 I could use a little info on my 830 in reply to David Hunt, 03-24-2005 18:34:39  
If one of you could look up #8303282 I sure would appreciate it. Duane



[Log in to Reply]  [No Email]
Poor Farm Jim

03-27-2005 08:09:16




Report to Moderator
 Re: I could use a little info on my 830 in reply to Duane(Pa), 03-25-2005 17:15:53  
David,

Not that it matters a whole lot, but your tractor was shipped on May 22 according to the production register. I even put on my "seeing" glasses to make sure.

Jim



[Log in to Reply]  [No Email]
buickanddeere

03-25-2005 20:06:31




Report to Moderator
 Re: I could use a little info on my 830 in reply to Duane(Pa), 03-25-2005 17:15:53  
How did you end up with that tractor in PA? Along with her twin sistor #8303283 She's a 830 BE ( starting engine) Shipped May 2nd to the Regina Sask Branch in Canada. Destination Prince Albert Sask. Her other sistor also a "BE", went to Sydney NE.



[Log in to Reply]  [No Email]
Duane(Pa)

03-26-2005 20:02:05




Report to Moderator
 Thanks a Million in reply to buickanddeere, 03-25-2005 20:06:31  
I have no idea how it got here. I heard it came on a load of standards "from out West" I have been playing with it since April of 95. I happen to be a 59 model too, although I didn't ship out until October 29th. Thanks for lookin' that up for me. Now I'll wonder even more about the beast!



[Log in to Reply]  [No Email]
mike brown

03-26-2005 05:36:36




Report to Moderator
 Re: I could use a little info on my 830 in reply to buickanddeere, 03-25-2005 20:06:31  
Could have driven it that far in thirty five years.



[Log in to Reply]  [No Email]
buickanddeere

03-25-2005 13:04:55




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to David Hunt, 03-24-2005 18:34:39  
What is the staus and starting setup on the tractor now? How far has she wandered away from Sandusky MI ?



[Log in to Reply]  [No Email]
David Hunt

03-25-2005 15:57:34




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to buickanddeere, 03-25-2005 13:04:55  
Thanx for all the info, the tractor has wound up in tennesee. i live about 45 minutes from where was shipped originally!!! thanx again.



[Log in to Reply]  [No Email]
Dave - Ia

03-24-2005 19:46:15




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to David Hunt, 03-24-2005 18:34:39  
Two cylinder published a 30 series production register and they may still have some. I have one and if you would give the number I could tell you.



[Log in to Reply]  [No Email]
prairiedeere

03-24-2005 20:54:58




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to Dave - Ia, 03-24-2005 19:46:15  
It is a tractor that I have and the nuber you need is 8305439. Thanks



[Log in to Reply]  [No Email]
fixerupper

03-24-2005 21:17:50




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to prairiedeere, 03-24-2005 20:54:58  
According to the Two Cyl club book, Ser # 8305439 was made on 11-16-59, shipped to the Lansing Mi. branch and sold at Sandusky Mi. The code is BF meaning standard diesel electric start.



[Log in to Reply]  [No Email]
buickanddeere

03-24-2005 21:16:43




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to prairiedeere, 03-24-2005 20:54:58  
830 BF ( Electric start) 8305439 Shipped Nov 16th 1959 to Lansing MI, Destination Sandusky MI. Both of it's sistors went to Page ND. One was electric and the other was a starting engine.



[Log in to Reply]  [No Email]
720Deere

03-24-2005 19:09:40




Report to Moderator
 Re: Can you tell by s/n if 830 is electric start o in reply to David Hunt, 03-24-2005 18:34:39  
Yes, the Two-Cylinder Club can do a serial number research and tell you if the tractor was shipped as pony or electric start. There is no serial number register publically available.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy